Megger 1002-001 Insulation Tester Lead, For Use With BM100

  • RS-stocknr. 448-7912
  • Fabrikantnummer 1002-001
  • Fabrikant Megger
Wetgeving en compliance

MIT400 Series Digital Insulation & Continuity Testers

All instruments meet IEC1010, HD384 and BSEN61557, and are sealed to IP54 for weatherproof performance.Easy to hold and comfortable to use, the large display provides the unique combination of two digital readouts and an analogue arc.All primary results are displayed in the larger digital display and repeated on the analogue arc. Additionally, auxiliary test information such as frequency, leakage current, Insulation or `circuit voltage etc is displayed in the smaller secondary digital display.Rubber over-moulding combines the tough shock absorbing outer protection with excellent grip, on a strong modified ABS housing, providing an almost indestructible case.Battery requirements are 5 AA batteries of either standard Alkaline (supplied) or Nickel Metal Hydride (NiMH) rechargeable type.

All models feature:

Insulation testing to 1000V with Insulation test voltage displayContinuity testing at 200mA down to 0.01ohmsAlternative 20mA test currentAC/DC Voltage measurementTrue RMS Measurement to 600V50V Live circuit test inhibitComplies with EN61010-1 CATIV 600VIP54 weatherproof housingHard carry caseOptional SP5 switched probe with remote test button for single-handed operation


RS is an authorised Megger distributor. Purchased though RS this product is eligible for the Megger extended 3 Year warranty

Supplied with

Durable hard carry case, silicone test lead set, AA alkaline batteries & instructions.

Megger Insulation Tester Leads

The Megger insulation tester lead is a set of two leads used for BM100 insulation and continuity tester. This tester is used as a replacement or spare test lead set. These leads have 4mm connector and can be used with a range of multimeters, clamp meters, insulation testers, multifunction testers & continuity testers. For insertion into a difficult application, it has an extremely thin width, the length of the test leads is approximately 120cm, and that of the finger probes is 9cm.
Supplied with:
instructions, 2 wire test lead set with crocodile clips, 8 x AA alkaline batteries, neck strap & carry case.

Features and Benefits

Double insulated for additional protection
• Red and Black Leads
• 4mm Right Angle Plugs on Instrument End
• 4mm Safety Probes and Croc Clips on Test End


CAT III 1000 V

Kenmerk Waarde
Accessory Type Lead
For Use With BM100
1 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
29 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
Was € 62,40
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 51,00