FTDI Chip USB to UART Interface Board for FT234XD, LC234X

  • RS-stocknr. 150-1571
  • Fabrikantnummer LC234X
  • Fabrikant FTDI Chip
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

The LC234X module provides a low cost USB to UART bridge using the FT234XD IC to transfer data at up to 3M Baud. Ideal for programming Arduino Pro, ESP modules etc., the pinouts follow the industry standard FTDI TTL cable interface. The LC234X features the 4 UART signals (RXD, TXD, RTS, CTS) and like the LC231X, the option to output 5V power to external hardware. The interface IO levels may be set to either 3.3V or 5V by an on-board jumper – no soldering / de-soldering required. In 5V mode, outputs are rail to rail for maximum reliability.

Configurable IO voltage interface
USB 2.0 full speed
Provides a full modem control interface
Supported baud rates: 300 bps to 3 Mbps
Provides two I/O header options
-40oC to +85oC operational temperature range
Full RoHS compliance

Specificaties
Kenmerk Waarde
Interface Function USB to UART
Kit Classification Interface Board
Featured Device FT234XD
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
6,45
(excl. BTW)
7,80
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 6,45
5 - 9
€ 6,25
10 - 24
€ 6,09
25 - 49
€ 5,93
50 +
€ 5,79
Related Products
A Click accessory module for use with MikroElektronika ...
Description:
A Click accessory module for use with MikroElektronika mikroBUS™ microcontroller development boards. The Matrix RGB click is a 16x32 RGB LED controller board incorporating a 32-bit FT900 microcontroller. A 16-way IDC connector on the board allows connection to a single ...
The MikroElektronika ProxFusion click board is a multifunctional ...
Description:
The MikroElektronika ProxFusion click board is a multifunctional capacitive and hall-effect sensor device. It has IQS624 which is a combined multi-sensor IC from Azoteq which includes hall-effect rotation sensing, along with dual channel capacitive proximity or touch sensing, or single-channel ...
The ADM2682E is a 5kVrms Signal and Power ...
Description:
The ADM2682E is a 5kVrms Signal and Power Isolated RS-485 Transceiver with ±15kV ESD Protection. Convenient connections for power and signal through screw terminal blocksConfigurable as half duplex or full duplex 5V or 3.3V operationEasily configurable through jumper connectionsTest points ...
Description:
The CAN SPI click add-on board is great for adding CAN connectivity to your industrial and home automation designs.Features & Benefits of the CAN SPI click•mikroBUS™ pinout standard•SN65HVD230 CAN transceiver•Suitable for 3.3 V power supply•Can withstand harsh environments.