ABB R600 Series 24V ac/dc DIN Rail Interface Relay Module, SPNO, Screw

  • RS-stocknr. 669-9952
  • Fabrikantnummer 1SNA645014R2700
  • Fabrikant ABB
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Interface Relay - R600 Series

ABB R600 series interface relays are used for electrical isolation, amplification and signal matching between a PLC, PC or field bus system and the sensor/actuator level. The compact design and different connection terminal possibilities optimise your panel installation.

Features and Benefits

Screw or spring type terminals Wide range of output options
Built in RC circuit
Leakage current protection on the input side
Available with visible or covered switch
Manual or automatic actuation
LED for the indication of the operational state

Specificaties
Kenmerk Waarde
Coil Voltage 24V ac/dc
Switching Current 6 A
Contact Configuration SPNO
Mounting Type DIN Rail
Terminal Type Screw
Length 70mm
Depth 6mm
Series R600
Height 75mm
Dimensions 70 x 6 x 75mm
Input Current 10mA
Turn Off Time 8ms
Turn On Time 5ms
Operating Temperature Range -20 → +70°C
Minimum Operating Temperature -20°C
Maximum Operating Temperature +70°C
16 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
51 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
Was € 32,00
28,05
(excl. BTW)
33,94
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 28,05
5 - 11
€ 27,20
12 +
€ 26,32
Related Products
DIN rail mounting, hermetically sealedPlug in jumpers to ...
Description:
DIN rail mounting, hermetically sealedPlug in jumpers to link common potentialsStatus LED and marking labelIntegrated diodes for coil suppression and polarity protectionContact rating 6A/250V acSwitching voltage 250 VacOperating temperature range 0 to +50°C.
14.3mm wide relay interfaces, for assembly on 35mm ...
Description:
14.3mm wide relay interfaces, for assembly on 35mm DIN rail, ideal for PLC interfacing.Available in electro-mechanical version.Connection by spring cage terminals for fast wiring of the conductors.Supplied with voltage indicator lamp and coil protection.Extraction and retaining clip.
15.8 mm wide relay interfaces, for assembly on ...
Description:
15.8 mm wide relay interfaces, for assembly on 35 mm DIN rail, ideal for PLC interfacing.Available in electro-mechanical version.Connection by spring terminals for fast wiring of the conductors.Supplied with voltage indicator lamp and coil protection.Extraction and retaining clip.
PLC-Interface relay modules with a push-in connection for ...
Description:
PLC-Interface relay modules with a push-in connection for DIN rail NS 35/7,5, and plug-in miniature solid-state relay. Featuring a yellow LED light indicator and 1 N/O contact for medium to larger loads, each module in this series also has a ...