ABB R600 Series 5V dc DIN Rail Interface Relay Module, SPDT, Screw

  • RS-stocknr. 669-9996
  • Fabrikantnummer 1SNA645036R2500
  • Fabrikant ABB
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Interface Relay - R600 Series

ABB R600 series interface relays are used for electrical isolation, amplification and signal matching between a PLC, PC or field bus system and the sensor/actuator level. The compact design and different connection terminal possibilities optimise your panel installation.

Features and Benefits

Screw or spring type terminals Wide range of output options
Built in RC circuit
Leakage current protection on the input side
Available with visible or covered switch
Manual or automatic actuation
LED for the indication of the operational state

Specificaties
Kenmerk Waarde
Coil Voltage 5V dc
Contact Configuration SPDT
Switching Current 6 A
Mounting Type DIN Rail
Terminal Type Screw
Length 70mm
Series R600
Depth 6mm
Height 75mm
Dimensions 70 x 6 x 75mm
Input Current 40mA
Turn Off Time 8ms
Turn On Time 5ms
Minimum Operating Temperature -20°C
Maximum Operating Temperature +70°C
Operating Temperature Range -20 → +70°C
19 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
115 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
32,10
(excl. BTW)
38,84
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 32,10
5 - 11
€ 31,13
12 +
€ 30,11
Related Products
For use where isolated output drive is required ...
Description:
For use where isolated output drive is required e.g. motors, lamps, heaters, solenoids, etc. Modules provide the complete output interface function incorporating optical isolation with power drive components. ac modules use zero voltage switching for low noise operation, a dc ...
HongFa 1RM series 16A single pole interface relay ...
Description:
HongFa 1RM series 16A single pole interface relay module featuring coil/contact separation and LED status indicator. The 1RM modules are supplied complete with relay, socket, ejector clip and identification label providing a quick simple installation option. Status LED Changeover contacts ...
DIN rail mounting, hermetically sealedPlug in jumpers to ...
Description:
DIN rail mounting, hermetically sealedPlug in jumpers to link common potentialsStatus LED and marking labelIntegrated diodes for coil suppression and polarity protectionContact rating 6A/250V acSwitching voltage 250 VacOperating temperature range 0 to +50°C.
Ideal interface for PLC and electronic systemsInstant ejection ...
Description:
Ideal interface for PLC and electronic systemsInstant ejection of relay using plastic retaining clipSupply status indication and coil suppression module as standard440Vac switching voltageWidth: 15.8mmContact material: AgNi.