Finder 41 Series 24V ac PCB Mount Power Relay Module, SPDT, PCB Pin

  • RS-stocknr. 894-9417
  • Fabrikantnummer 41.31.8.024.0000
  • Fabrikant Finder
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: IT
Productomschrijving

41 Series - 41.52, 41.31 & 41.61

PCB mount power relays with ac and dc coils.

Low profile
Flux proof, RTII
Minimum switching load 300mW
8mm creepage and clearance between coil and contacts
Dimensions 15.7x12.5x29 mm

Approvals

UL (Canada & US); VDE

Specificaties
Kenmerk Waarde
Coil Voltage 24V ac
Switching Current 12 A
Contact Configuration SPDT
Mounting Type PCB Mount
Terminal Type PCB Pin
Length 29mm
Depth 12.6mm
Series 41 Series
Height 15.7mm
Dimensions 29 x 12.6 x 15.7mm
Contact Material Silver Alloy
Maximum Operating Temperature +70°C
Operating Temperature Range -40 → +70°C
Special Features AC and DC Coils, Cadmium Free Contact Materials, Flux proof: RT II Standard (RT III Option)
Number of Poles 1
Minimum Operating Temperature -40°C
Turn Off Time 6ms
Turn On Time 8ms
Input Resistance 350Ω
Standards Met CULus, EAC, PCT, RINA, UL, VDE
10 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
4,58
(excl. BTW)
5,54
(incl. BTW)
Aantal stuks
Per stuk
1 - 5
€ 4,58
6 - 11
€ 4,39
12 +
€ 4,25
Related Products
For use where isolated output drive is required ...
Description:
For use where isolated output drive is required e.g. motors, lamps, heaters, solenoids, etc. Modules provide the complete output interface function incorporating optical isolation with power drive components. ac modules use zero voltage switching for low noise operation, a dc ...
15.8 mm wide relay interfaces, for assembly on ...
Description:
15.8 mm wide relay interfaces, for assembly on 35 mm DIN rail, ideal for PLC interfacing.Available in electro-mechanical version.Connection by spring terminals for fast wiring of the conductors.Supplied with voltage indicator lamp and coil protection.Extraction and retaining clip.
ABB R600 series interface relays are used for ...
Description:
ABB R600 series interface relays are used for electrical isolation, amplification and signal matching between a PLC, PC or field bus system and the sensor/actuator level. The compact design and different connection terminal possibilities optimise your panel installation. Screw or ...
A range of Schneider Electric interface relays from ...
Description:
A range of Schneider Electric interface relays from the Zelio series. These plug in Relays are suitable for standard applications. Simple installation and operationContacts material silver alloy (Ag/Ni)DC or AC coilOperating temperature -40 → 70 °CIngress protection IP40.