Siemens Inverter Drive, 1-Phase In, 0 → 550Hz Out 0.25 kW, 230 V ac, 4.5 A SINAMICS G110, IP20

  • RS-stocknr. 505-2107
  • Fabrikantnummer 6SL3211-0AB12-5UA1
  • Fabrikant Siemens
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

SINAMICS G110 Frequency Inverter Single Phase without Filter

Features and benefits

SINAMICS G110 is a frequency inverter with basic functionality for operating 3-phase motors in 1-phase networks Characterised by ease of use
Very compact devices
Capacity range 0.12 → 3 kW
Improved brake functionality
Without filter
Simple cable connection as with circuit breakers
Pluggable optional basic operator panel (BOP)
Simple guided start-up
Copy function via operating panel
Parametrisable U/F curve
3 parametrisable digital inputs, 2-wire/3-wire control possible
1 analogue input (0 → 10 V), can be used as a fourth digital input
1 parametrisable optocoupler output
3 programmable fixed frequencies
Integrated protection functions

Siemens Sinamics G110 Range

The Sinamics family of drives is aimed at users who do not require vast arrays of control functions to undertake the required control application.,The G110 is a versatile inverter which operates a 3 phase motor, while being powered by a single phase supply.

Installation and commissioning is fast and uncomplicated
Time saving parameter cloning using the optional Basic Operator Panel
Contactor style power terminal layout
Configurable voltage boost for higher dynamic response when starting and accelerating
Fast braking without external brake resistor
Auto restart facility following a power failure or operating fault
Integral EMC filter
Easy DIP switch selection of mains input frequency 50 or 60Hz
In-built protection functions include under or over voltage, earth fault, short circuit, stall prevention, drive and motor over-temperature protection
IP20 protection rating
3 programmable digit inputs, 1 analogue (0-10V)
Designed for the world market
Typical applications: conveyors, pumps, doors, barriers

Specificaties
Kenmerk Waarde
Power Rating 0.25 kW
Phase 1
Supply Voltage 230 V ac
Current Rating 4.5 A
Output Frequency 0 → 550Hz
Ambient Temperature -10 → +40°C
Overall Width 90mm
Overall Length 150mm
Overall Depth 116mm
Series SINAMICS G110
IP Rating IP20
2 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
125,10
(excl. BTW)
151,37
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 125,10
Related Products
SINAMICS V20 is a cost-effective, reliable and easy-to-use ...
Description:
SINAMICS V20 is a cost-effective, reliable and easy-to-use inverter for basic applications. V20 Inverter DriveSingle phase inputWith filterUSS and MODBUS RTU at terminalsWide voltage rangeECO mode for V/f and V²/fAdvanced cooling designParameter loading without power supplyPush-through or wall mounting.
SINAMICS G110-CPM110 AC Drive, unfiltered 200-240V1AC+10/-10% 47-63Hz RS485 ...
Description:
SINAMICS G110-CPM110 AC Drive, unfiltered 200-240V1AC+10/-10% 47-63Hz RS485 interface (USS protocol) CT: 0.25kW, VT: 0.25kW CT overload: 150% 60s 150x 90x 101 (HxWxD) with flat heat sink, only for cooling plate installation Ambient temperature -10+50 °C without BOP without analog ...
Unidrive M200 connects with many of the common ...
Description:
Unidrive M200 connects with many of the common field buses using the modular ’SI’ interface port. It can communicate with SI-Ethernet, SI-EtherCAT, SI-PROFINET, SI-PROFIBUS, SI-CAN open and SI-DeviceNet. The RFC-A mode means you’ll benefit from consistent running speeds, at current ...
Unidrive M400 minimizes downtime with an intuitive LCD ...
Description:
Unidrive M400 minimizes downtime with an intuitive LCD display for rapid set-up and clear diagnostic help. The integrated PLC can execute a substantial range of sequencing and logic programs. Coupled with an impressive I/O count complete with two STO inputs ...