Vishay TSOP18438, 38kHz IR Receiver ±45 °, 24m Range, 2.5V - 5V, Through Hole, 5 x 4.8 x 6.95mm

  • RS-stocknr. 176-2588
  • Fabrikantnummer TSOP18438
  • Fabrikant Vishay
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: PH
Productomschrijving

The TSOP18... series devices are the latest generation miniaturized IR receiver modules for infrared remote control systems. This series provides improvements in sensitivity to remote control signals in dark ambient as well as in sensitivity in the presence of optical disturbances e.g. from CFLs. The robustness against spurious pulses originating from Wi-Fi signals has been enhanced. The devices contain a PIN diode and a preamplifier assembled on a lead frame. The epoxy package contains an IR filter. The demodulated output signal can be directly connected to a microprocessor for decoding.

Improved dark sensitivity
Improved immunity against optical noise
Improved immunity against Wi-Fi noise
Low supply current
Photo detector and preamplifier in one package
Internal filter for PCM frequency
Supply voltage:2.5V to 5.5V
Insensitive to supply voltage ripple and noise

Specificaties
Kenmerk Waarde
Carrier Frequency 38kHz
Maximum Transmission Distance 24m
Angle of Half Transmission Distance ±45 °
Daylight Filter Type Epoxy Package
Output Current 5mA
Components Photo Detector, Preamplifier
Number of Pins 3
Mounting Type Through Hole
Dimensions 5 x 4.8 x 6.95mm
Height 6.95mm
Length 5mm
Maximum Supply Voltage 5.5V
Minimum Supply Voltage 2.5V
Operating Temperature Range -25 → +85°C
Series TSOP18
Maximum Operating Temperature +85°C
Package Type TSOP
Minimum Operating Temperature -25°C
Output Signal Type Demodulated
Supply Voltage Range 2.5 → 5.5 V
Width 4.8mm
2900 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Pack of 20)
0,686
(excl. BTW)
0,83
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
20 - 80
€ 0,686
€ 13,72
100 - 180
€ 0,549
€ 10,98
200 - 480
€ 0,522
€ 10,44
500 - 980
€ 0,412
€ 8,24
1000 +
€ 0,343
€ 6,86
*prijsindicatie
Related Products
Vishay's IR Receivers are used for remote control ...
Description:
Vishay's IR Receivers are used for remote control and infrared communication applications, in infrared code learning / repeater, infrared light barriers, and infrared proximity sensors. Infrared receivers operate in the wavelength range of 840 nm and 960 nm. Highly sensitive, ...
Vishay's IR Receivers are used for remote control ...
Description:
Vishay's IR Receivers are used for remote control and infrared communication applications, in infrared code learning / repeater, infrared light barriers, and infrared proximity sensors. Infrared receivers operate in the wavelength range of 840 nm and 960 nm. Highly sensitive, ...
The TSOP22.., TSOP48.., TSOP24.. and TSOP44.. series are ...
Description:
The TSOP22.., TSOP48.., TSOP24.. and TSOP44.. series are miniaturized IR receiver modules for infrared remote control systems. A PIN diode and a preamplifier are assembled on lead frame, the epoxy package contains an IRfilter.The demodulated output signal can be directly ...
Vishay's IR Receivers are used for remote control ...
Description:
Vishay's IR Receivers are used for remote control and infrared communication applications, in infrared code learning / repeater, infrared light barriers, and infrared proximity sensors. Infrared receivers operate in the wavelength range of 840 nm and 960 nm. Highly sensitive, ...