TRACOPOWER TEP 160WIR DC-DC Converter, 48V dc/ 3.8A Output, 43 → 160 V dc Input, 142 → 182W, Through
- RS-stocknr.:
- 754-1435
- Fabrikantnummer:
- TEP 160-7218WIR
- Fabrikant:
- TRACOPOWER
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 15-10-2024, met een levertijd van 1 werkdag.
Toegevoegd
Prijs Per stuk
€ 249,04
(excl. BTW)
€ 301,34
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 - 4 | € 249,04 |
| 5 - 9 | € 241,57 |
| 10 - 24 | € 234,10 |
| 25 - 49 | € 224,14 |
| 50 + | € 214,17 |
- RS-stocknr.:
- 754-1435
- Fabrikantnummer:
- TEP 160-7218WIR
- Fabrikant:
- TRACOPOWER
Wetgeving en compliance
- Land van herkomst:
- TW
Productomschrijving
Traco 142-182W Isolated PCB Mount Railway Compliant DC-DC Converter - TEP-160WIR
142-182W single output isolated PCB mount DC-DC converters in a sealed metal half brick package. These isolated railway compliant DC-DC converters have a wide 4:1 input voltage range, adjustable output voltage and a high efficiency of up to 91% allowing full power operation without forced air cooling at 25°C. When used with a heatsink (stock number 706-6420) this temperature can be increased up to 60°C.
Compact half brick design
Wide 4:1 input voltage range
Adjustable output voltage
EN50155 approval for railway applications
High efficiency
No minumum load
Soft start
Sense line
Remote On/Off input
Reverse input voltage, overtemperature, short circuit and over voltage protection
EMC compliance: EN 55022 class A/B with external components
Wide 4:1 input voltage range
Adjustable output voltage
EN50155 approval for railway applications
High efficiency
No minumum load
Soft start
Sense line
Remote On/Off input
Reverse input voltage, overtemperature, short circuit and over voltage protection
EMC compliance: EN 55022 class A/B with external components
Note
For suitable heatsink see stock number 706-6420
MTBF to MIL-HDBK-217F, at +25°C
Derate 1.5%/K above +25°C without heatsink
Derate 1.5%/K above +40°C with heatsink
MTBF to MIL-HDBK-217F, at +25°C
Derate 1.5%/K above +25°C without heatsink
Derate 1.5%/K above +40°C with heatsink
Standards
EN 50155, UL 60950-1, IEC/EN 60950-1
Traco - 75W to 240W - TEP Series
Specificaties
Kenmerk | Waarde |
|---|---|
| Output Voltage | 48V dc |
| Input Voltage Range | 43 → 160 V dc |
| Power Rating | 142 → 182W |
| Input Voltage Nominal | 72 V dc |
| Output Current | 3.8A |
| Mounting Type | Through Hole |
| Isolated | Yes |
| Number of Outputs | 1 |
| Isolation Voltage | 2.25kV dc |
| Length | 61mm |
| Depth | 12.7mm |
| Railway Approved | Yes |
| Series | TEP 160WIR |
| Load Regulation | ±0.2% |
| Medical Approved | No |
| Maximum Temperature | +75°C |
| Minimum Temperature | -40°C |