ABB 630 A 3P Fused Isolator Switch, 3 Fuse Size

  • RS-stocknr. 762-2648
  • Fabrikantnummer 1SCA022825R2830
  • Fabrikant ABB
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: FI
Productomschrijving

Standard OS Fused Disconnector

The switch fuses from the ABB OS series are available in 3 or 4 pole. These fused switches are easy to use and snap to install, the adjustable mounting feet allow both top and side mounting of the switch fuse.

Supplied with a black plastic ON/OFF handle (OHB45J6 for OS32-63 and OHB65J6 for OS100-160) and adjustable operating shaft (OXP6X161for OS32 to 160)
For longer operating shafts see stock no. 710-0609 for 360mm or stock no. 710-0618 for 430 mm
Lockable handles with 'Test' position are available, for Black see stock no. 710-0611
Fuse carrier protected to IP20, however when mounted correctly in a suitable enclosure and using either the supplied or optional handle, a front panel protection rating of IP65 is achieved
The fuse covers cannot be removed when the switch is in the 'ON' position
Panel or DIN rail mounting
Auxiliary contacts may be fitted to the side
4 Pole (Neutral) non fused
Different Ampere Ratings available

ABB OS Range

A fused switch disconnector provides a cost effective means of short circuit protection, together with circuit isolation. The choice of fuse rating determines the level of protection, the maximum value is determined by the fused switch disconnector. These items have been tested in accordance with EN 60947-3.

Specificaties
Kenmerk Waarde
Number of Poles 3P
Mechanical Fuse Size 3
Fuse Current Rating 800A
Auxiliary Contacts Available Yes
Maximum Current 630 A
Electrical Phase 3
Mounting Type DIN Rail
1 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
1.838,00
(excl. BTW)
2.223,98
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 1.838,00
Related Products
Rocker & pushbutton on-off switches which automatically disconnect ...
Description:
Rocker & pushbutton on-off switches which automatically disconnect in the event of power loss. Nominal operating voltage 230V; switching current 16A Prevents re-start of machinery or equipment in unsafe conditionExtra contact versions permit remote trippingPanel mount, cutout size (45.2x21.7mm)Protection kits ...
TeSys GS fusible disconnect switches ensure load closing ...
Description:
TeSys GS fusible disconnect switches ensure load closing or cut-off, safety isolation and protection against surges for all low voltage electrical circuits.Located at the top of electrical panels, they are specially designed to protect and interrupt main circuits (including the ...
E 90 series fuse-disconnectors are designed for connecting ...
Description:
E 90 series fuse-disconnectors are designed for connecting and disconnecting circuits under load, providing protection against short circuits and overloads. The case is made of self-extinguishing thermoplastic material resistant to high temperatures (all materials are UL listed) while the contact ...
TeSys GS switch-disconnector-fuses provide on-load breaking or making, ...
Description:
TeSys GS switch-disconnector-fuses provide on-load breaking or making, safe isolation and overcurrent protection of all low voltage electrical circuit. Can be used with NFC, DIN and BS fusesUpstream and downstream breaking of fuses for all ratingsConditional short-circuit withstand voltage of ...