Pramet Indexable Lathe Tool Insert, 3.97mm x 16.5mm, Grade T8330

  • RS-stocknr. 136-3966
  • Fabrikantnummer TCMT 16T308E-FM:T8330
  • Fabrikant Pramet
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: CZ
Productomschrijving

TCMT Turning Insert

TCMT inserts provide 3 cutting edges for improved economy. Suitable for chamfering in a wide range of materials.

Turning Inserts

Breakdown of ISO Reference

Higher Number = Tougher / Resistant to Impact
Lower Number = Harder / Wear Resistant

TU5525 the New Universal Turning Grade

TU5525 is a truly universal tuning grade suitable for cutting Steel, Stainless Steel, Cast Iron and heat resistant Aaloys. There is no need to hold stock of a multitude of grades reducing the cost of inventory and time wasted changing inserts. One insert for almost all applications.

TP2135 a Tough Impact Resistant Grade

If insert breakage or chipping of the cutting edge is a problem TP2135 may be the answer. Some application do not offer the cutting edge a constant cutting surface whether from a non round part or holes in the part this constant impact on the cutting edge can lead to insert failing. TP2135 is designed to take higher impact loads giving a more secure cutting edge, suitable for cutting steel, stainless steel and heat resistant alloys.

Specificaties
Kenmerk Waarde
Type Indexable
Shape Triangular
Bore Diameter 4.5mm
Length 16.5mm
Grade T8330
Height 3.97mm
60 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 10)
10,60
(excl. BTW)
12,83
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 +
€ 10,60
€ 106,00
*prijsindicatie
Related Products
For use with DCLN, PCBN, PCKN and PCLN ...
Description:
For use with DCLN, PCBN, PCKN and PCLN Holders & Bars. Excellent for machining SteelAcceptable for Cast Iron and Hardened Steels.
For use with DDJN, PDJN, PDNN, PDXN and ...
Description:
For use with DDJN, PDJN, PDNN, PDXN and PDUN Holders & Bars. Excellent for machining SteelAcceptable for Cast Iron and Hardened Steels.
CVD Coated Insert for general internal turning operations. ...
Description:
CVD Coated Insert for general internal turning operations. Positive geometry for low depths of cut and finishing applications. For use with SCAC, SCBC, SCDC, SCFC, SCLC and SCXC Holders and Bars. Excellent for machining Steel, Stainless Steel and Cast IronAcceptable ...
TNMG Negative Turning Insert for use with DTGN, ...
Description:
TNMG Negative Turning Insert for use with DTGN, DTFN, PTFN, PTGN, PTTN, PTFN and MTJN Holders and Bars. Excellent for machining SteelAcceptable for Cast Iron and Hardened Steels.