FT801Q-R, LCD Controller LCD Support I2C Bus, SPI Buss 3.3 V, 48-Pin VQFN

  • RS-stocknr. 865-9893
  • Fabrikantnummer FT801Q-R
  • Fabrikant Bridgetek
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

EVE, Embedded Video Engine FT801

FTDI’s FT801 is an accessible LCD graphic controller targeted for embedded applications to produce high-quality Human Machine Interfaces (HMIs). This Embedded Video Engine (EVE) with widget support can offload the system MPU and deliver a range of graphic features. It’s functionality includes graphic controller, audio processing, and capacitive touch controller interface which are supported by WQVGA (480x272) and QVGA (320x240) displays. The FT801 calculates for 8-bit colour even with pins for 6-bit (RGB-6,6,6); thus improving the half tone appearance.

Support capacitive touch screen with up to 5 touches detection
Enhanced sketch processing
Programmable interrupt controller provides interrupts to host MPU/MCU
Built-in 12MHz crystal oscillator with PLL providing 48MHz or 36MHz system clock
Clock switch command for internal or external clock source. External 12MHz crystal or clock input can be used for higher accuracy
Display enable control output to LCD panel
Low power consumption for portable application, 24mA active (typical) and 250 uA sleep (typical)
No frame buffer RAM required
Advanced object oriented architecture enables low cost MPU/MCU as system host using I2C and SPI interfaces
Power mode control allows chip to be put in power down, sleep and standby states
Supports host interface I/O voltage from 1.8V to 3.3V
Standard serial interface to host MPU/MCU with SPI up to 30MHz or I²C clocking up to 3.4MHz
Internal voltage regulator supplies 1.2V to the digital core
-40°C to 85°C extended operating temperature range
Available in a compact Pb-free, VQFN-48, 7mm X 7mm X 0.9mm package, RoHS compliant

Specificaties
Kenmerk Waarde
Maximum Resolution 512 x 512pixel
Display Support LCD
CPU Interface I2C Bus, SPI Buss
Mounting Type Surface Mount
Package Type VQFN
Pin Count 48
Typical Operating Supply Voltage 3.3 V
Dimensions 7 x 7 x 0.9mm
Length 7mm
Width 7mm
Height 0.9mm
Maximum Operating Temperature +85 °C
Minimum Operating Temperature -40 °C
824 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
3,66
(excl. BTW)
4,43
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 3,66
Verpakkingsopties
Related Products
The highly flexible and integrated PMIC configurable devices ...
Description:
The highly flexible and integrated PMIC configurable devices from Texas Instruments allow you to scale your power solutions to handle the sequencing, voltage and current requirements of processors, Microcontrollers, FPGAs and system-level peripherals. Digital Light Processing (DLP) Pico Technology enables ...
The STMicroelectronics ARM Cortex-M4 STM32 F303 and STM32 ...
Description:
The STMicroelectronics ARM Cortex-M4 STM32 F303 and STM32 F313 mixed signal microcontrollers for embedded applications with DSP, MPU (memory protection unit), ETM (embedded trace macrocell) and FPU (floating point unit) instructions.The STM32 F3 ARM® Cortex™ 32-bit RISC core devices operate ...
The STM32 F429/F439 microcontroller are based on the ...
Description:
The STM32 F429/F439 microcontroller are based on the ARM® Cortex™ M4 microcontroller with 180 MHz CPU operating up to 256 KB SRAM and up to 2 MB of dual bank Flash with SDRAM interface, Chrom-ART and LCD-TFT controller. The STM32F439 ...
The SAMA5D4 series is a high-performance, ultra-low-power ARM ...
Description:
The SAMA5D4 series is a high-performance, ultra-low-power ARM Cortex-A5 processor-based MPU. The Cortex-A5 runs up to 600MHz and features the ARM NEON SIMD engine, a 128KB L2 cache and a floating-point unit. It supports multiple memories, including DDR2 and LPDDR2. ...