Infineon EFICL5102U130WCCTOBO1, 130W LED Driver PFC/LLC-CC Evaluation Board with ICL5102 LED Driver Evaluation Board

  • RS-stocknr. 179-6979
  • Fabrikantnummer EFICL5102U130WCCTOBO1
  • Fabrikant Infineon
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

The REF-ICL5102-U130W-CC evaluation board is a 130W SMPS LED power supply with constant current output in a voltage range from 76V down to 38V. Features include a wide output current range from 1.75A down to 0.003A, a wide dimming level of 100 percent down to 0.25 percent, fast time-to-light of 350ms, a high power factor more than 90 percent at 50 percent load at 230VAC and an input current THD less than 5 percent at 50 percent load at 230VAC.

Summary of features
Input voltage range: 90–305VAC
Input voltage frequency: 47–63Hz
Regulated main output current: 0.003–1.75A in a output voltage range from 38VDC up to 76VDC
Dimming level from 100% to 0.25%
Summary of benefits
High efficiency
High power factor and low THD
Very stable output current
Numerous monitor and protection features
Cost competitive solution

Specificaties
Kenmerk Waarde
LED Technology LED Driver
Kit Classification Evaluation Board
For Use With PFC/LLC-CC
Featured Device ICL5102, IPD60R400CE
Kit Name 130W LED Driver PFC/LLC-CC Evaluation Board with ICL5102
2 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
133,93
(excl. BTW)
162,06
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 133,93
Related Products
The MCP1630 Boost Mode LED Driver Demo Board ...
Description:
The MCP1630 Boost Mode LED Driver Demo Board is a step-up, switch-mode, dc-dc converter used for power LED applications. The demo board provides a 350mA or 700mA constant current source with jumper selection. The operating supply is 9Vdc to 16Vdc ...
A Click accessory module for use with MikroElektronika ...
Description:
A Click accessory module for use with MikroElektronika mikroBUS™ microcontroller development boards. The Matrix RGB click is a 16x32 RGB LED controller board incorporating a 32-bit FT900 microcontroller. A 16-way IDC connector on the board allows connection to a single ...
The CAT4101 is a low dropout current sink ...
Description:
The CAT4101 is a low dropout current sink capable of driving strings of high-brightness LEDs up to 1A. The current sink is programmed by a single resistor from the RSET pin to GND. Enable and dimming control is available via ...
The STEVAL-ILL056V1 is a product evaluation board based ...
Description:
The STEVAL-ILL056V1 is a product evaluation board based on the LED5000, an 850 kHz fixed switching frequency monolithic step-down DC-DC converter designed to operate as a precise constant current source with an adjustable current capability up to 3 A DC. ...