400 W Metal Halide Lighting Ballast, 220 → 240 V

  • RS-stocknr. 714-1426
  • Fabrikantnummer VSE 40/24-C2-AI-P 2Mang
  • Fabrikant ELT
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: ES
Productomschrijving

Encapsulated HID Ballast / Ignitor

Mains high power factor Class II IP54 encapsulated ballast / ignitors for metal halide lamps for outdoor use comprising of a ballast, ignitor and a power factor correction capacitor.

IP54 for outdoor use
Maximum load capacity 2000pF
Ballasts are vacuum impregnated with polyester resin and encapsulated in polyurethane resin
Class II thermoplastic casing
Connection with double insulated cables for mains and lamp
Thermal protection incorporated
Winding temperature (tw) 130°C

Specificaties
Kenmerk Waarde
Wattage 400 W
Number of Lamps 1
Supported Lamp Type Metal Halide
Voltage Rating 220 → 240 V
Dimmable No
Length 222 mm
Height 83mm
Maximum Operating Temperature +40°C
EU Energy Efficiency Rating A2
8 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
168,70
(excl. BTW)
204,13
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 168,70
Related Products
Slim and lightweight electronic high frequency ballasts for ...
Description:
Slim and lightweight electronic high frequency ballasts for controlling T5 fluorescent lamps. Flicker free operation and start after 0.5 secondElectrode heating cut off circuit ensures optimal lamp operation and system efficiencyAutomatic stop circuit shuts failed lamp down within 5 secondsProtected ...
High frequency, electronic microprocessor controlled ballasts for CDM ...
Description:
High frequency, electronic microprocessor controlled ballasts for CDM and other ceramic metal halide lamps giving extended lamp life of 30% against magnetic ballastsEnd of life detectionLow energy lossesPush in contacts for ease of wiringAccurate control of lamp reduces colour differences ...
Charger/inverter modules for converting fluorescent luminaires into emergency ...
Description:
Charger/inverter modules for converting fluorescent luminaires into emergency lighting units.,The module and battery packs fit inside most modern fluorescent batten fittings. For luminaires that have limited internal dimensions or that have internal temperatures above 50°C, remote mounting boxes are also ...
CELMA Energy Efficiency Index A2 BAT / A2Nominal ...
Description:
CELMA Energy Efficiency Index A2 BAT / A2Nominal life time up to 50000 hours (at 50 °C ambient)Large temperature rangeDevices can operate either 1 or 2 lampsIntelligent Voltage Guard (overvoltage indication and undervoltage shutdown)Constant luminous flux irrespective of fluctuations in ...