42 W Electronic Compact Fluorescent Lighting Ballast, 220 → 240 V

  • RS-stocknr. 873-5101
  • Fabrikantnummer QTP-T/E 1X26-42,2X26/220-240
  • Fabrikant Osram
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

QUICKTRONIC PROFESSIONAL M Electronic Control Gear for Compact Fluorescent Lamps

The Osram Quicktronic Professional M is an electronic control gear for compact fluorescent lamps. This ECG guarantees a long lamp life and is not affected by frequent on/off switching. The Quicktronic Professional M is the perfect electronic ballast for use with motion sensor lighting.
Ideal applications for the Quicktronic-M ECG are in emergency lighting systems, public buildings, sports halls, factories, also suitable for luminaires of protection class I.

Long lamp life
No adverse effect from frequent on/off switching
Perfect lamp start for applications with motion sensors
Supply voltage: 220-240V
Line voltage: 198-264V
Line frequency: 0 Hz | 50 Hz | 60 Hz
Lamp start with optimum filament preheating
Energy Efficiency Index EEI: A2
Automatic shutdown of defective lamps and at end of life

Specificaties
Kenmerk Waarde
Wattage 42 W
Number of Lamps 2
Ballast Type Electronic
Supported Lamp Shape CFL
Supported Lamp Type Compact Fluorescent
Voltage Rating 220 → 240 V
Dimmable No
Length 103 mm
Width 67 mm
Height 31mm
Minimum Operating Temperature -20°C
Maximum Operating Temperature +50°C
Series QUICKTRONIC
EU Energy Efficiency Rating A2
22 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
53 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
13,87
(excl. BTW)
16,78
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 13,87
Related Products
Slim and lightweight electronic high frequency ballasts for ...
Description:
Slim and lightweight electronic high frequency ballasts for controlling T5 fluorescent lamps. Flicker free operation and start after 0.5 secondElectrode heating cut off circuit ensures optimal lamp operation and system efficiencyAutomatic stop circuit shuts failed lamp down within 5 secondsProtected ...
Slim and lightweight electronic high frequency ballasts for ...
Description:
Slim and lightweight electronic high frequency ballasts for controlling T5 fluorescent lamps. Flicker free operation and start after 0.5 secondElectrode heating cut off circuit ensures optimal lamp operation and system efficiencyAutomatic stop circuit shuts failed lamp down within 5 secondsProtected ...
Charger/inverter modules for converting fluorescent luminaires into emergency ...
Description:
Charger/inverter modules for converting fluorescent luminaires into emergency lighting units.,The module and battery packs fit inside most modern fluorescent batten fittings. For luminaires that have limited internal dimensions or that have internal temperatures above 50°C, remote mounting boxes are also ...
ELT high frequency ballast, Class I for built-in ...
Description:
ELT high frequency ballast, Class I for built-in use. This multipower electronic ballast Operates two T8 lamps. Class I for built in useIgnition with pre-heating in cathodes for long lamp life without flashes and flickeringConstant total power and stabilized luminous ...