STMicroelectronics L6374FP, 4 (Industrial)-TX, Line Transmitter 12 V, 15 V, 18 V, 24 V, 20-Pin SOIC

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

High-Side Driver Quad Intelligent Power Switch, STMicroelectronics

Intelligent high-side switches provide one or more channel MOSFET output switches to drive inductive, capacitive or resistive loads.

Multipower BCD technology
0.5A four independent outputs
9.5 to 35V supply voltage range
Internal current limit
Non-dissipative over-current protection
Thermal shutdown
Under voltage lockout with hysteresys
Diagnostic output for under voltage, over temperature and over current
External asynchronous reset input
Presettable delay for overcurrent

Intelligent Power Switches, STMicroelectronics

Specificaties
Kenmerk Waarde
Number of Transmitters 4 (Industrial)
Transmitter Signal Type Differential, Single Ended
Power Supply Type Single
Typical Single Supply Voltage 12 V, 15 V, 18 V, 24 V
Mounting Type Surface Mount
Package Type SOIC
Pin Count 20
Dimensions 10 x 4 x 1.65mm
Height 1.65mm
Length 10mm
Minimum Operating Temperature -25 °C
Width 4mm
Maximum Operating Temperature +85 °C
160 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Tube of 40)
6,102
(excl. BTW)
7,383
(incl. BTW)
Aantal stuks
Per stuk
Per tube*
40 - 40
€ 6,102
€ 244,08
80 - 120
€ 5,797
€ 231,88
160 - 360
€ 5,302
€ 212,08
400 - 760
€ 5,058
€ 202,32
800 +
€ 4,607
€ 184,28
*prijsindicatie
Related Products
The Microchip MCP2551 is a high-speed CAN Transceiver ...
Description:
The Microchip MCP2551 is a high-speed CAN Transceiver that can operate at speeds of up to 1 Mbps. Serving as an interface between a CAN Controller and the physical bus, the MCP2551 provides differential transmit and receive capability and is ...
The MAX14827A integrates the high-voltage functions commonly found ...
Description:
The MAX14827A integrates the high-voltage functions commonly found in industrial sensors, including drivers and regulators. The MAX14827A features two ultra-low-power drivers with active reverse-polarity protection. Operation is specified for normal 24V supply voltages up to 60V. Transient protection is simplified ...
The Maxim family of dual RS232 line drivers ...
Description:
The Maxim family of dual RS232 line drivers and receivers are intended for all EIA/TIA-232E, V.24 and V.28 communications interface. Maxim’s RS232 dual transmitter/receiver will allow applications such as interface translation, modem, laptop as well as RS232 battery-powered systems due ...
Linear Technology’s RS485 standards are widely used in ...
Description:
Linear Technology’s RS485 standards are widely used in local networks as well as data transfer over long distances and they are ideal in industrial and commercial applications. The Profibus (Process Field Bus) protocol is carried out for fieldbus solutions in ...