INA Linear Ball Bearing Block GWA25

  • RS-stocknr. 172-1204
  • Fabrikantnummer GWA25
  • Fabrikant INA
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Shaft support blocks are used to support shafts and locate the ends of the shaft.
They are suitable for all the solid and hollow shafts in this catalogue.
They are made from either an aluminium alloy or pressure diecast zinc.
Series GWA is identical in design to series GW but is suitable for larger fixing screws.
Depending on the series, the shaft support blocks have through holes or threaded holes.

Specificaties
Kenmerk Waarde
Housing Height 58mm
Housing Length 25mm
Housing Width 74mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 09-12-2019, met een levertijd van 2 à 3 werkdagen.
Prijs Each
52,27
(excl. BTW)
63,25
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 52,27
5 - 9
€ 50,72
10 +
€ 49,16
Related Products
Closed housing design for use with LBCR linear ...
Description:
Closed housing design for use with LBCR linear ball bearing and LPAR linear plain bearings. Integral grease nipple.
Designed to house ball bushings from 8mm to ...
Description:
Designed to house ball bushings from 8mm to 25mmAluminium constructionDIN 472 circlip fixing required.
Precision housingCompact Linear Bushing StandardClosed typeTwo internal sealsLubricated ...
Description:
Precision housingCompact Linear Bushing StandardClosed typeTwo internal sealsLubricated with Dynalub 510.
Linear bearings and linear bearing and housing units ...
Description:
Linear bearings and linear bearing and housing units are available in the compact, light, heavy duty, machined and plain bearing range. The bearings can support high loads while having a relatively low mass and allow the construction of linear guidance ...