Igus Slim Line Pillow Block ESTM-08-SL

  • RS-stocknr. 712-5008
  • Fabrikantnummer ESTM-08-SL
  • Fabrikant Igus
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

igubal® Slimline Pillow Blocks

Compact design saves space
No lubrication; totally maintenance-free
No corrosion and light weight
Fitted by self tapping screws into base (not supplied, use no. 6 self-tapping screws)
5mm to 10mm diameter sizes
Temperature range: -30 to +80°C

Flange Units & Pedestal / Pillow Blocks

IGUBAL® pillow block bearings are self-lubricating and require no maintenance. Designed to run dry major advantages include the bearings are extremely tolerant to dirt and dust, meaning that IGUBAL® can be used in abrasive environments.

Low weight (20% of equivalent steel)
High rigidity
Maintenance free-dry running
Corrosion and chemically resistant
High fatigue strength under changing loads
Working temperature range: -30 to +80°C

Specificaties
Kenmerk Waarde
For Bearing Length 19mm
For Bearing Inside Diameter 8mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 01-11-2019, met een levertijd van 2 à 3 werkdagen.
Prijs Each
2,90
(excl. BTW)
3,51
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 2,90
5 - 9
€ 2,79
10 - 24
€ 2,71
25 +
€ 2,67
Related Products
Fixed bearing with angular contact thrust ball bearing. ...
Description:
Fixed bearing with angular contact thrust ball bearing. Precision pillow block housing made of steel with reference edges on two sidesAngular contact thrust ball bearing LGNSlotted nut NMZHousing nut GWRThe nut is supplied unmounted.
Manual flaring tools are used to produce the ...
Description:
Manual flaring tools are used to produce the required 37° flare at the hydraulic tube end to ensure an effective single seal point between the nose of the Triple-Lok flared tube fitting and the tube. These tools are used in ...
Shaft support blocks are used to support shafts ...
Description:
Shaft support blocks are used to support shafts and locate the ends of the shaft.They are suitable for all the solid and hollow shafts in this catalogue.They are made from either an aluminium alloy or pressure diecast zinc.Series GWA is ...
Pluggable in any positionSupply to rail centre → ...
Description:
Pluggable in any positionSupply to rail centre → 160 A, or → 100A at rail endLarge 50 mm² connecting terminals for longitudinal or transverse feedSupply option for auxiliary power rails via 10 mm² terminals.