Igus Closed Linear Plain Bearing, RJUM-01-10

  • RS-stocknr. 617-4624
  • Fabrikantnummer RJUM-01-10
  • Fabrikant Igus
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Closed Bushing

Standard Design,In some applications it may be necessary to replace the bearing liner only. Replacement liners are simply pushed into the aluminium housings.

//media.rs-online.com/t_line/L311346-24.gif

Self-Lubricating Bushes - Drylin™

Drylin™ bearings are manufactured from high performance polymers. They run without lubrication and require no maintenance. They consist of a polymer liner located in an aluminium housing. Both standard and self-compensating styles are available in closed and split configurations. Features include very low friction, suitability for high speed and acceleration use, high load bearing capacity and self-wiping design. The bearings run on aluminium, steel and ceramic shafts.

Specificaties
Kenmerk Waarde
Linear Plain Bearing Type Plain
Configuration Closed
Inside Diameter 10mm
Outside Diameter 19mm
Length 29mm
Dynamic Load Rating 725N
Static Load Rating 5075N
7 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
12,47
(excl. BTW)
15,09
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 12,47
5 - 9
€ 12,09
10 +
€ 11,69
Related Products
’Frelon’ liner resists most chemicals and withstands vibration ...
Description:
’Frelon’ liner resists most chemicals and withstands vibration and shock. Operating temperature range is -240 to +260°C. Suitable for rotary motion. Silent, self-lubricating operation.
Aluminium housing (8 and 10mm ID), anodised aluminium ...
Description:
Aluminium housing (8 and 10mm ID), anodised aluminium housing 12mm - 30mmLiner JUM-01 as standardRecommended tolerance for shaft: h6 - h10.
’Frelon’ liner resists most chemicals and withstands vibration ...
Description:
’Frelon’ liner resists most chemicals and withstands vibration and shock. Operating temperature range is -240 to +260°C. Suitable for rotary motion. Silent, self-lubricating operation. Maximum Speed Dry: 91.4 m/minMaximum Speed Lubricated: 251.4 m/minMaximum PV Product: 430 m/min x kg/cm².
Share the same dimensions as LBBR ball bushingsPolyacetal ...
Description:
Share the same dimensions as LBBR ball bushingsPolyacetal with specific polyethylene bearing surfacesLow-maintenance. Good emergency running properties and low “stick”Resistant to heavy static stress and insensitive to shocksInitial lubrication necessary, even if dry running is required later.