Igus Open Linear Plain Bearing, OJUM-01-20

  • RS-stocknr. 617-4668
  • Fabrikantnummer OJUM-01-20
  • Fabrikant Igus
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Open Bushing

Standard Design,Recommended tolerance for the shaft: h6-h10.

//media.rs-online.com/t_line/L617464-01.gif

Self-Lubricating Bushes - Drylin™

Drylin™ bearings are manufactured from high performance polymers. They run without lubrication and require no maintenance. They consist of a polymer liner located in an aluminium housing. Both standard and self-compensating styles are available in closed and split configurations. Features include very low friction, suitability for high speed and acceleration use, high load bearing capacity and self-wiping design. The bearings run on aluminium, steel and ceramic shafts.

Specificaties
Kenmerk Waarde
Linear Plain Bearing Type Plain
Configuration Open
Inside Diameter 20mm
Outside Diameter 32mm
Length 45mm
Dynamic Load Rating 2250N
Static Load Rating 15750N
5 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
21,70
(excl. BTW)
26,26
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 21,70
5 - 9
€ 21,03
10 +
€ 20,34
Related Products
’Frelon’ liner resists most chemicals and withstands vibration ...
Description:
’Frelon’ liner resists most chemicals and withstands vibration and shock. Operating temperature range is -240 to +260°C. Suitable for rotary motion. Silent, self-lubricating operation. Maximum Speed Dry: 91.4 m/minMaximum Speed Lubricated: 251.4 m/minMaximum PV Product: 430 m/min x kg/cm².
Share the same dimensions as LBBR ball bushingsPolyacetal ...
Description:
Share the same dimensions as LBBR ball bushingsPolyacetal with specific polyethylene bearing surfacesLow-maintenance. Good emergency running properties and low “stick”Resistant to heavy static stress and insensitive to shocksInitial lubrication necessary, even if dry running is required later.
LPAR Plain Bushings share the same dimensions as ...
Description:
LPAR Plain Bushings share the same dimensions as LBCR linear ball bushings and the same technical features of the LPBR linear plain bearingsLPAR bushings can be fastened and secured in the same way as linear ball bearings, but require additional ...
Self Compensating,Uses a spherical area on the outer ...
Description:
Self Compensating,Uses a spherical area on the outer casing for self adjustment. Reductions in the load bearing capacity due to the self-adjusting function are thus avoided, because the shaft is always supported on the entire projected surface. Replacement liners are ...