United Automation, 230 V Voltage Regulator, 15A, Adjustable 3-Pin CSR1504A

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

CSR Power Regulator 6A, 10A & 15A, United Automation

United Automation CSR Power Regulator integrated chips (IC) control single phase mains driven loads of 6A, 10A and 15A. The Solid-state phase controlled power regulator needs external 220 k or 250 k linear potentiometers (not supplied) and controls the power into a resistive load from 0% to 98%. Applications include resistive heating elements like quartz lamps, ovens and dryers as well as some inductive loads such as transformers, fans and motors.

Transistor style housing with isolated heat sink tab

Applications

Suitable for coventional resistive heating elements such as ovens, quartz lamps, moulders and dryers. They are also suitable for many inductive loads such as transformers, fans and motors.

Specificaties
Kenmerk Waarde
Output Voltage 230 V
Maximum Output Current 15A
Output Type Adjustable
Mounting Type Through Hole
Maximum Input Voltage 230 V
Pin Count 3
Minimum Operating Temperature 0 °C
Maximum Operating Temperature +70 °C
Dimensions 17.5 x 7.6 x 29.3mm
Height 29.3mm
Series CSR1
Length 17.5mm
Width 7.6mm
8 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
20,74
(excl. BTW)
25,10
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 20,74
5 - 9
€ 19,31
10 - 19
€ 17,52
20 +
€ 16,13
Related Products
The Texas Instruments μA78 families are linear voltage ...
Description:
The Texas Instruments μA78 families are linear voltage regulators that cover a range of fixed output voltages from 2.6 V to 15 V.The three terminal positive voltage regulators offer thermal overload shutdown and internal current limiting. There is no need ...
The MIC943x5 Ripple Blocker™ is a monolithic integrated ...
Description:
The MIC943x5 Ripple Blocker™ is a monolithic integrated circuit that provides low-frequency ripple attenuation (switching noise rejection) to a regulated output voltage. This is important for applications where a DC/DC switching converter is required to lower or raise a battery ...
The ROHM SOT-223 package is a 3-terminal regulator ...
Description:
The ROHM SOT-223 package is a 3-terminal regulator available with several fixed output voltages. It has an output voltage rating of 5V and a current rating of 200mA. A logical “HIGH” at the CTL pin enables the device and “LOW” ...
Description:
2 A DC output current4 V to 38 V operating input voltageLow consumption mode or low noise mode30 μA IQ at light load (LCM VOUT = 3.3 V)8 μA IQ-SHTDWNAdjustable fSW (250 kHz - 2 MHz)Output voltage adjustable from 0.85 ...