onsemi NC7S04P5X 1-Input Inverter Logic Gate, 5-Pin SC-70
- RS-stocknr.:
- 186-7330
- Fabrikantnummer:
- NC7S04P5X
- Fabrikant:
- onsemi
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
- RS-stocknr.:
- 186-7330
- Fabrikantnummer:
- NC7S04P5X
- Fabrikant:
- onsemi
Datasheets
Wetgeving en compliance
Productomschrijving
The NC7S04 is a single high performance CMOS Inverter. Advanced Silicon Gate CMOS fabrication assures high speed and low power circuit operation over a broad VCC range. ESD protection diodes inherently guard both input and output with respect to the VCC and GND rails. Three stages of gain between input and output assures high noise immunity and reduced sensitivity to input edge rate.
Space saving SOT23 or SC70 5-lead package
Ultra small MicroPak™ leadless package
High Speed: tPD = 3 ns typ
Low Quiescent Power: ICC < 1 μA
Balanced Output Drive: 2 mA IOL, -2 mA IOH
Broad VCC Operating Range: 2V - 6V
Balanced Propagation Delays
Specified for 3V operation
Applications
This product is general usage and suitable for many different applications.
Ultra small MicroPak™ leadless package
High Speed: tPD = 3 ns typ
Low Quiescent Power: ICC < 1 μA
Balanced Output Drive: 2 mA IOL, -2 mA IOH
Broad VCC Operating Range: 2V - 6V
Balanced Propagation Delays
Specified for 3V operation
Applications
This product is general usage and suitable for many different applications.
Specificaties
Kenmerk | Waarde |
|---|---|
| Logic Function | Inverter |
| Mounting Type | Surface Mount |
| Number of Elements | 1 |
| Number of Inputs per Gate | 1 |
| Package Type | SC-70 |
| Pin Count | 5 |
| Input Type | CMOS |
| Maximum Operating Supply Voltage | 6 V |
| Maximum High Level Output Current | -2.6mA |
| Maximum Propagation Delay Time @ Maximum CL | 125 ns @ 50 pF |
| Minimum Operating Supply Voltage | 2 V |
| Maximum Low Level Output Current | 2.6mA |
| Maximum Operating Temperature | +85 °C |
| Output Type | CMOS |
| Minimum Operating Temperature | -40 °C |
| Length | 2.2mm |
| Width | 1.35mm |
| Height | 1mm |
| Dimensions | 2.2 x 1.35 x 1mm |
| Propagation Delay Test Condition | 50pF |