RS PRO Loop Impedance Tester 3 Wire ±2% IPT1800 RS Calibration

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TW
Productomschrijving

RS Pro IPT1800 Digital PSC & Loop Tester

RS Pro IPT1800 is a great value, microprocessor-controlled PSC/loop tester. Its high loop impedance range permits direct measurement of ground spikes. Features include an auto lock-out if the test resister overheats.

Features and Benefits

Large 3 digit 2000 count with analog bargraph LCD
200 A, 2000 A & 20 kA PSC ranges
20 Ω, 200 Ω & 2000 Ω loop impedance ranges
AC voltage indication
Direct reading of PSC
Over temperature test inhibit with indication
Dimensions 180 x 130 x 70 mm
Weight 800 g approximately

Standards

EN61557 and BS7671 wiring regulations, EN61010-1 300V CAT III

Supplied with

Test Lead with IEC connector (AC cord), external earth probe, neck strap, user manual

RS Pro Loop Testers

Specificaties
Kenmerk Waarde
Loop Impedance Test Type 3 Wire
Calibrated RSCAL
Best Loop Test Accuracy ±2%
Resolution 0.01 Ω
PSC Display Yes
Display Type LCD
Power Source Mains
Dimensions 180 x 130 x 70mm
Weight 800g
Height 70mm
Length 180mm
Maximum Operating Temperature +40°C
Model Number p IPT1800
Minimum Operating Temperature 0°C
Width 130mm
Plug Type Type G - British 3-pin
13 op voorraad - levertijd is 1 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
229,00
(excl. BTW)
277,09
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 229,00
Related Products
Fluke 1650 series testers verify the safety of ...
Description:
Fluke 1650 series testers verify the safety of electrical installations in domestic, commercial and industrial applications.They allow electrical wiring to be certified to the new standard NF C 1500.These devices combine simplicity, efficiency, ruggedness and ergonomics to represent a new ...
Earth loop impedance testers to verify the loop ...
Description:
Earth loop impedance testers to verify the loop impedance of a live electrical circuit without the need to disconnect the electrical supply. The LTW300 series instruments offer a safe and easy 2 wire loop testing solution that does not trip ...
The Megger LTW425 two wire earth loop tester ...
Description:
The Megger LTW425 two wire earth loop tester verifies the loop impedance of a live electrical circuit, ie without the need to disconnect the electrical supply. Offers a high resolution 2-wire loop testing solution that does not trip 30 mA ...
Single-phase 3-wire non-DDR trip loop tester.Differential circuit breaker ...
Description:
Single-phase 3-wire non-DDR trip loop tester.Differential circuit breaker testing 10 mA → 1000 mA.Ramp testing to verify the DDR trip limit.Extremely easy and safe to use.Integrated protective front cover.Tough rubber armoured case.IP54 sealed.The LRCD200 is ideal for electricians working on ...