Megger LT300 Loop Impedance Tester 2 Wire 550V ±5% CAT IV 300 V LT300 UKAS Calibration

  • RS-stocknr. 537-4621
  • Fabrikantnummer LT300
  • Fabrikant Megger
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

LT300 Loop Tester

The LT300 combines high current-loop testing over a wide range of frequencies and supply voltages with simple operation. This is a HIGH CURRENT ONLY tester, designed for installations where there are no RCDs installed. A two-wire test performs a fast loop impedance measurement at a test current up to 27A, with a resolution of 0.01ohms. Frequency range and operating voltage are wide, allowing for a diverse range of applications up to and including CATIV 550V phase-to-phase. Testing commences automatically as soon as the instrument is connected to the supply. Repeat testing is provided by the TEST button.

High current loop tester
Simple auto start operation
16Hz to 400Hz frequency range
Up to CATIV 300V phase-to-earth (550V phase-to-phase) applications
Optional two-wire lead set available separately, RS stock no. 537-7282

Note

RS is an authorised Megger distributor. Purchased though RS this product is eligible for the Megger extended 3 Year warranty

Supplied with

durable hard carry case; BS1363 mains socket test lead; 8 x AA alkaline batteries; instructions.

Specificaties
Kenmerk Waarde
Loop Impedance Test Type 2 Wire
Calibrated UKAS
Maximum Voltage Measurement 550V
Best Loop Test Accuracy ±5%
Resolution 0.1 Ω
Safety Category CAT IV 300 V
Display Type LCD
Battery Type AA
Power Source Battery
Dimensions 203 x 148 x 78mm
Weight 980g
Height 78mm
Model Number p LT300
Maximum Operating Temperature +60°C
Safety Category Level CAT IV
Minimum Operating Temperature -10°C
Width 148mm
Maximum Test Frequency 400Hz
Length 203mm
Safety Category Voltage 300V
Plug Type Type G - British 3-pin
Minimum Test Frequency 16Hz
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 20-08-2020, met een levertijd van 1 werkdag.
Prijs Each
613,00
(excl. BTW)
741,73
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 613,00
Related Products
Ensure safe and reliable testing with the Socket-check ...
Description:
Ensure safe and reliable testing with the Socket-check adapters. This Socket-Check adapter will ensure safe, reliable testing with optimal contact to outlet. This adapter can be used in conjunction with a wide variety of test equipment that uses test leads ...
Introducing the RS PRO electrical tester, a high-performance ...
Description:
Introducing the RS PRO electrical tester, a high-performance tester ideal for use on motors, generators, cables, or switch-gear. This electrical tester has been designed to perform a full range of multifunctional tests including insulation resistance, earth resistance, loop impedance, voltage, ...
Earth loop impedance testers to verify the loop ...
Description:
Earth loop impedance testers to verify the loop impedance of a live electrical circuit without the need to disconnect the electrical supply. The LTW300 series instruments offer a safe and easy 2 wire loop testing solution that does not trip ...
Single-phase 3-wire non-DDR trip loop tester.Differential circuit breaker ...
Description:
Single-phase 3-wire non-DDR trip loop tester.Differential circuit breaker testing 10 mA → 1000 mA.Ramp testing to verify the DDR trip limit.Extremely easy and safe to use.Integrated protective front cover.Tough rubber armoured case.IP54 sealed.The LRCD200 is ideal for electricians working on ...