Telemecanique Sensors XCSZP1 Actuator, For Use With XCSDMC Safety Switch

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: FR
Productomschrijving

XCS-DMC/XCS-DMP Coded Magnetic Switches, Rectangular

XCS-DM coded magnetic safety switches are designed for monitoring the doors, covers and guards of industrial machines with imprecise guiding and low inertia. These safety switches are ideally suited for machines subjected to frequent washing or liquid spray. They protect the operator by immediately stopping any dangerous movement as soon as the distance between the switch and its magnet is greater than 8mm (5mm for XCS-DMC).
XPS-DM safety modules are specifically designed for monitoring the coded magnetic safety switches. When the XCS-DM safety switch is used in conjunction with the XPS-DM safety relay they offer a certified safety solution for guard monitoring.

Coded magnetic safety switch

Actuation on 3 sides: face to face and face to side
8mm tolerance to misalignment (5mm for XCS-DMC)
LED versions have an LED in series with one N/C giving indication when guard is closed
Coded reed technology - switch cannot be totally defeated by a simple magnet
Rectangular plastic housing
Dimensions: compact: H51 x W16 x D7mm, standard: H88 x W25 x D13mm
Available pre-cabled or with connector on flying lead
IP66/67 protection in accordance with EN/IEC 60529
ROHS compliant

Safety module

Allows multi-switch monitoring to Safety Category 4 solutions in accordance with EN954-1/ISO 13849-1
XPS-DMB can monitor 2 independent sensors and modules, XPS-DME can monitor 6 independent sensors and modules
2 safety outputs and 2 solid state outputs for signalling to the process PLC
LEDs on the front face provide information on the monitoring circuit status
Dimensions: H99 x W22 x D114mm
IP20 protection on terminals and IP40 protection on enclosure, in accordance with EN/IEC 60529

Note

With the appropriate monitoring system and correctly wired these switches can reach safety category 4 conforming to EN/ISO 13849-1, PL e conforming to EN/ISO 13849-1, SIL 3 conforming to EN/IEC 61508.

Standards

IEC 947-1; EN 547-5-1; EN 547-5-3; EN 60204-1; EN 1088 (for Magnetic Switch only)
IEC 204-1; EN 292; EN 60204-1; EN954-1; EN1088 (for Safety Module only)

Specificaties
Kenmerk Waarde
Actuator Type Coded
Accessory Type Actuator
For Use With XCSDMC Safety Switch
16 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
23,40
(excl. BTW)
28,31
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 23,40
10 - 14
€ 22,46
15 +
€ 21,48
Related Products
3 positive opening contacts as standard (on guard ...
Description:
3 positive opening contacts as standard (on guard opening)A key operated lock enables positive locking of the guardOptional version with orange LED to indicate guard open/closedHeavy duty metal DIN styleTurret heads can be rotated through 360° in 90 steps8 actuator ...
2 positive opening contacts as standard, on guard ...
Description:
2 positive opening contacts as standard, on guard openingHead rotates in 90° steps giving 8 actuator entry pointsMinimum operating force for positive opening: 15NIngress protection IP671 x cable entry tapped M16 x 1.5 ISO or PG11Actuator needs ordering separately (see ...
Applications:. Schneider Electric introduces the Prevent XY2 SB ...
Description:
Applications:. Schneider Electric introduces the Prevent XY2 SB two-hand control safety for complete site safety. The health and comfort of operators is paramount, resting handrails have been installed for ergonomic comfortability. Simple adjustments can be made when mounted onto a ...
Double insulated thermoplastic enclosureAuxiliary unlocking facility as an ...
Description:
Double insulated thermoplastic enclosureAuxiliary unlocking facility as an installation aid, and in the case of a power failure M5 key available, stock no 198-74813 cable entriesActuator keys have 5.5mm tolerance play.