Allen Bradley Guardmaster 871A-SCBP18 Mounting Bracket, For Use With SensaGuard 440N Switch

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: US
Productomschrijving

SensaGuard 440N Cylindrical Non-Contact Switch

The SensaGuard Non-Contact Switch is PLe, SIL 3 and Cat 4 rated and is intended for use with sliding, hinge or lift-off machine guard doors. These safety switches are based on RFID (Radio Frequency IDentification) technology for coding and inductive technology for sensing. Combined with a large sensing range for optimum operation and tolerance to misalignment, these non-contact switches are a cost-effective solution to a wide range of industrial safety applications.

No dedicated controller required for its RFID coding security
Switches can be connected in series with other devices (e.g. Light Curtains, E-stops, interlock switches)
PLe, SIL 3, Cat 4 rating maintained with multiple units connected in series
Can be connected to standard safety relays, SmartGuards and safety I/O blocks
They provide three different types of PNP output including one auxiliary PNP
Equipped with an LED to indicate the device status and any faults
IP69K environmental rating

Note

Stainless steel version suitable for use in harsh environments.

Standards

IEC60947-5-3, IEC 61508, EN954

Supplied with

Actuator.

Specificaties
Kenmerk Waarde
Accessory Type Mounting Bracket
For Use With SensaGuard 440N Switch
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 24-12-2019, met een levertijd van 2 à 3 werkdagen.
Prijs Each
4,26
(excl. BTW)
5,15
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 4,26
Related Products
Each miniTwin stick contains both the sender and ...
Description:
Each miniTwin stick contains both the sender and receiver elements, each symmetrically mounted in one half of a housing and separated by a central synchronisation beam. The diagram shows two identical miniTwin units offset by 180° working as both sender ...
Miniature tongue-operated safety interlock with 2 sets of ...
Description:
Miniature tongue-operated safety interlock with 2 sets of contacts, particularly useful for light duty sliding and small radii hinged machine guardsDual entry and rotatable head allows up to 8 options for actuator entry positionForced guided contacts - complies with EN ...
The head is secured by tamper-resistant screws and ...
Description:
The head is secured by tamper-resistant screws and can be rotated allowing 8 possible actuator entry positions including front and end entryForced guided contacts - complies with EN 1088, IEC 947-5-1Painted die cast zinc bodyContacts break actuation travel; 6mmOperating temperature; ...
Optional flexible actuator reduces minimum operating radiusLid mounted ...
Description:
Optional flexible actuator reduces minimum operating radiusLid mounted status indication2 possible actuator entry positions - front and end entrySupplied with dedicated Atlas actuatorPower to release3 sets of contacts, 2N/C 1N/O.