RE310-S3, Single Sided Matrix Board with 38 x 221 1mm Holes, 2.54 x 2.54mm Pitch, 580 x 100 x 1.5mm

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

RE310 Prototype Board, 3 Hole Pads

35 μm CU on one side
HAL hot dip tin-plated
CEM3 base material
Hole diameter: 1 mm
Connected in 3 hole pattern

DIN Type Matrixboard

Matrix boards with 1mm holes on a 2.54mm pitch.

Specificaties
Kenmerk Waarde
Number of Sides Single Sided
Hole Pitch 2.54 x 2.54mm
Dimensions 580 x 100 x 1.5mm
Length 580mm
Width 100mm
Thickness 1.5mm
Base Material CEM3
Hole Diameter 1mm
Hole Layout 38 x 221
Copper Thickness 35µm
4 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
14,39
(excl. BTW)
17,41
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 14,39
10 - 19
€ 11,23
20 - 49
€ 10,94
50 +
€ 10,67
Related Products
Matrix boards with 1mm holes on a 2.54mm ...
Description:
Matrix boards with 1mm holes on a 2.54mm pitch. RE60, RE220, RE320, RE525Printed circuit boards made from FR2 laminated paper (HP) coated with solder maskFR4 epoxy PCBs (LF), lead-free, tin-platedSize: 100 x 160 mm (European size)Material thickness 1.5 mm35 μm ...
Single-sided copper-tin plated stripboard.2.54 mm drilled pitch.Board thickness: ...
Description:
Single-sided copper-tin plated stripboard.2.54 mm drilled pitch.Board thickness: 1.6 mm.
Matrix boards with 1mm holes on a 2.54mm ...
Description:
Matrix boards with 1mm holes on a 2.54mm pitch. Nominal thickness 1.5mmCopper thickness 35μmHole pitch 2.54mm (0.1in)Hole dia 1.0mm.
Through holes have etched-free ring on ground plane ...
Description:
Through holes have etched-free ring on ground plane side to provide isolated ground plane on component sidePlated through holes for both DIN connector and PCB matrix (RE334 only)Ground plane designed to reduce EMI problems in high frequency circuitsDouble sided Epoxy ...