RS PRO Metric Dial Indicator, Magnetic Base Measuring Set

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: CN
Productomschrijving

RS Magnetic Base & Dial Indicator Set

Professional, switchable magnetic base with a solid cross arm cable of mounting plunger or lever indicators for precision controlled measurements

Dial Indicator

A precision plunger dial indicator with a large 60mm/ 2.35in dial. Ideal or general purpose workshop or precision machine shop use.

Rotating bezel with bevel lock
Adjustable dial
Integral tolerance pointers
M2.5 diameter ball anvil measuring contact
Lug back mounting fitted as standard

Magnetic Base (40 kg)

Magnetic base with fine adjustment cross arm.

Switchable magnetic base with ON/OFF switch
Supports Plunger Dial and Lever Indicators
Large 40kg magnetic hold
230mm high
Upright post 12mm with a M8 x 1.25 thread
Fine adjustment Solid cross arm 10mm x 150mm

Specificaties
Kenmerk Waarde
Set Contents Dial Indicator, Magnetic Base
Maximum Dial Indicator Measurement 10mm
Maximum Caliper Measurement 100 a/c, 100 c/w
Accuracy ±0.008 mm
Imperial or Metric Metric
6 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
69 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
70,05
(excl. BTW)
84,76
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 70,05
Related Products
Professional anti-magnetic lever indicator that can reach places ...
Description:
Professional anti-magnetic lever indicator that can reach places conventional indicators cannot. The one piece bezel and O-ring seal make the crystal resistant to dust and water while the face is easy to read due to the scratch resistant coating. This ...
Easy-to-read indicator with full-size digits.GO/NG tolerance display.Unlimited response ...
Description:
Easy-to-read indicator with full-size digits.GO/NG tolerance display.Unlimited response speed eliminates spindle over-speed errors.Functions: power ON/OFF, ZERO/ABS switching, data output, tolerance limit setting, PRESET, counting direction switching. Resolution: 0.001mm/0.01mmAccuracy: 0.003 mm.Measuring force ...
A precision dial comparator with solid box type ...
Description:
A precision dial comparator with solid box type housing. Shockproof movementBall guide plunger mechanism, jewelled movementConstant measuring forceStainless steel mounting shank and spindleAdjustable tolerance markersKnurled fine adjustment screw.
Dial rotates 360 degrees5 button operation Inch/metric conversion; ...
Description:
Dial rotates 360 degrees5 button operation Inch/metric conversion; ABS/set; Zero/ONTolerance/directionRan. Run-Out mode Value Change: 0.003mm / 0.00012inDigital fan for run-out viewingMax speed: 0.6m/sMeasuring force: 1.5NCentre lug back8mm stem with anvil thread M2.5DIN 878Power: 1 x 3V CR2032 Lithium Battery.