Mica Heater, 190 x 320 mm, 300 W

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

Micaflat Heaters

Mica heaters are best used on flat surfaces requiring heating where silicone or film heaters are not suitable for temperatures above 160 °C.
These heaters must be temperature controlled and fitted correctly for best performance.
Flat mica plate heaters are used in applications as e.g.: Dies, Platens, Moulds, Tanks, Process Machinery.

Constructed by winding resistance wire
Insulated and terminal connections fitted
Encased in Zintec sheet which gives good mechanical strength and protection
High temperature surface heating up to 260 °C

Flat Plate Mica Heaters

Used when heat is needed on a flat surface, but when it is impractical to bore a hole in the plate. The flat mica heater allows heat to be distributed evenly across the surface. A much higher watt density can be achieved using these heaters than with silicone rubber mat heaters. 280°C maximum operating temperature.

Specificaties
Kenmerk Waarde
Dimensions 190 x 320 mm
Peak Temperature +260°C
Power Rating 300 W
Supply Voltage 230 V
Lead Length 350mm
Length 190mm
Width 320mm
7 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
80,83
(excl. BTW)
97,80
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 80,83
5 +
€ 78,36
Related Products
The silicone side drum heater reduces the viscosity ...
Description:
The silicone side drum heater reduces the viscosity of materials such as soaps, fats, foodstuffs, varnishes and chemicals allowing them to be pumped or poured with ease Effective and simple the silicone side drum heater gives exceptional performance incorporating a ...
Silicone drum heaters are used to reduce the ...
Description:
Silicone drum heaters are used to reduce the viscosity of liquids, a maximum of 3 can be applied to 200 litre drums to either speed up the melting process or for even heat distribution, class II double insulated.The drum heaters ...
RS Pro strip heaters are economical heat sources, ...
Description:
RS Pro strip heaters are economical heat sources, suitable for providing heat to flat surfaces. The heaters feature a high temperature oxidation metal sheath and high grade mica insulation resistant to moisture and high temperatures. Nickel/Chromium resistance wire is evenly ...
Mica heaters are best used on flat surfaces ...
Description:
Mica heaters are best used on flat surfaces requiring heating where silicone or film heaters are not suitable for temperatures above 160 °C.These heaters must be temperature controlled and fitted correctly for best performance.Flat mica plate heaters are used in ...