Mica Heater, 1.5 (Dia.) x 1.5 mm, 220 W

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

Sealed Mica Nozzle Heaters

These nozzle heaters are hermetically sealed for liquid plastic within the manufacturing process. These types of heaters are used to give long life where normal mica heaters cannot last as long due to process leakages.
These heaters are typically used on injection moulding machines, extruders, dies, moulds and process machinery.

Constructed by winding resistance wire
Insulated and terminal connections fitted
Encased in brass casing which gives good mechanical strength and protection
Supply voltage is 230 V
Up to 300 °C
Cable length is 1m
Available in various sizes

Multi-Purpose Process Heaters

In order to obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them.

Warning

  • These heaters shall only be used where adequate electrical, thermal and mechanical barriers are provided to prevent access to hazardous parts without the use of a tool.
Specificaties
Kenmerk Waarde
Dimensions 1.5 (Dia.) x 1.5 mm
Peak Temperature +300°C
Power Rating 220 W
Supply Voltage 230 V
Lead Length 1m
Width 1.5in
Diameter 38 mm
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
56,45
(excl. BTW)
68,30
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 56,45
5 +
€ 54,72
Related Products
RS Pro Nozzle heaters are designed with the ...
Description:
RS Pro Nozzle heaters are designed with the highest quality materials used for optimal performance. The heaters are most commonly used in the plastic industry but are also suitable to use in applications of up to 1000°F. • High temperature ...
In order to obtain optimum performance from these ...
Description:
In order to obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them. Cartridge heaters have high temperature lead wires that can stand temperature of up to 450̊CHigh impact ceramic cap ...
In order to obtain optimum performance from these ...
Description:
In order to obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them. Cartridge heaters have high temperature lead wires that can stand temperature of up to 450̊CHigh impact ceramic cap ...
Mica heaters are best used on flat surfaces ...
Description:
Mica heaters are best used on flat surfaces requiring heating where silicone or film heaters are not suitable for temperatures above 160 °C.These heaters must be temperature controlled and fitted correctly for best performance.Flat mica plate heaters are used in ...