Microchip PIC16F18325-I/SL, 8 bit PIC, PIC16F18325 Microcontroller, 32 MHz, 14kB FLASH, 14-Pin SOIC

Bekijk alle Microcontrollers

Subtotaal (1 tube van 57 eenheden)*

€ 54,663

(excl. BTW)

€ 66,12

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • Plus verzending 285 stuk(s) vanaf 24 februari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
Per tube*
57 +€ 0,959€ 54,66

*prijsindicatie

RS-stocknr.:
159-7573
Fabrikantnummer:
PIC16F18325-I/SL
Fabrikant:
Microchip
Land van herkomst:
TH

PIC16F18325/18326/18345/18346 8-Bit Microcontrollers


The PIC16F range of Microcontrollers from Microchip are 8-bit MCUs that incorporate Microchip’s PIC® architecture in various pin and package options.

PIC16F18325/18345 Microcontrollers are based on Microchip’s Enhanced Mid-Range core and include new Low-Power features. IDLE and DOZE modes have been added along with Peripheral Module Disable, this allows peripherals to be removed from the power rail and clock tree for zero power leakage.

Microcontroller Features


8 MIPS Max. CPU Speed

49 Instructions

16 Level Hardware Stack

Interrupt Capability

Internal Oscillator

12 or 18 I/O Pins

Power-On Reset (POR)

Configurable Power-Up Timer (PWRTE)

Brown-Out Reset (BOR) and Low-Power Brown-Out Reset (LPBOR)

Extended Watchdog Timer (WDT)

In-Circuit Serial Programming (ICSP)

In-Circuit Debug (ICD)

Low voltage Programming (LVP)

Peripheral Pin Select (PPS)

Power-Saving Features


Peripheral Module Disable (PMD) – Ability to disable unused peripherals for minimal power consumption

SLEEP, IDLE and DOZE Low-Power Modes

Sleep mode: 40 nA @ 1.8 V (typical)

Watchdog Timer: 250 nA @ 1.8 V (typical)

Secondary Oscillator: 300 nA @ 32 kHz

Operating Current: 8 μA @ 32 kHz 1.8 V (typical)

Peripheral Features


10-bit Analogue-to-Digital Converter – 11 or 17 channels depending on model

5-Bit Digital-to-Analogue Converter (DAC)

Two Comparators (COMP)

Voltage Reference

Four Configurable Logic Cells (CLC)

Two Complementary Waveform Generators (CWG)

Four Capture/Compare/PWM (CCP) modules

Two 10-bit PWMs

Numerically Controlled Oscillator (NCO)

EUSART – RS-232, RS-485 and LIN compatible

Two Master Synchronous Serial Ports (MSSP) – I2C, SMBus, PMBus compatible

Data Signal Modulator (DSM)

Four 8-bit Timers with Hardware Limit Timer (HLT)

Three 16-bit Timers

Gerelateerde Links