- RS-stocknr.:
- 182-8014
- Fabrikant:
- RS PRO
11 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
5 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk
€ 5,70
(excl. BTW)
€ 6,90
(incl. BTW)
Aantal stuks | Per stuk |
1 - 4 | € 5,70 |
5 - 9 | € 5,59 |
10 + | € 5,47 |
- RS-stocknr.:
- 182-8014
- Fabrikant:
- RS PRO
Datasheets
Wetgeving en compliance
- Land van herkomst:
- DE
Productomschrijving
RS PRO Hostaform Bevel Gear
The RS PRO 4:1 metric moulded bevel gear is made from white HOSTAFORM®C. It has a pitch module of 2 and 10 teeth.
Other Information:
What are bevel gears?
Bevel Gear is a cone-shaped gear, which transmits power between two intersecting axels.
Why choose HOSTAFORM® gears?
HOSTAFORM® is a semi-crystalline, thermoplastic polymer. It is a versatile engineering plastic with good wear resistance, hardness, rigidity, excellent dimensional stability, long-term creep resistance and outstanding resistance to moisture, alkaline solutions, fuels and many chemicals.
Other Information:
What are bevel gears?
Bevel Gear is a cone-shaped gear, which transmits power between two intersecting axels.
Why choose HOSTAFORM® gears?
HOSTAFORM® is a semi-crystalline, thermoplastic polymer. It is a versatile engineering plastic with good wear resistance, hardness, rigidity, excellent dimensional stability, long-term creep resistance and outstanding resistance to moisture, alkaline solutions, fuels and many chemicals.
Features and Benefits
• Standard tolerances, unless otherwise stated 0.25mm
• Shaft axis to intersect within 0.025mm
• Angular accuracy between shafts 5mins
• Mounting distance tolerance 0.05mm
• Bore tolerance H8
• Single wheel
• Cut to the Gleason System
• 20 pressure angle
• Not sold as a set. Sold singularly.
• Shaft axis to intersect within 0.025mm
• Angular accuracy between shafts 5mins
• Mounting distance tolerance 0.05mm
• Bore tolerance H8
• Single wheel
• Cut to the Gleason System
• 20 pressure angle
• Not sold as a set. Sold singularly.
Certifications
• EN certified
• DIN 3964
• DIN 3967
• DIN 3971
• DIN 3964
• DIN 3967
• DIN 3971
Specificaties
Kenmerk | Waarde |
---|---|
Bore | 6mm |
Module | 2.0 |
Gear Type | Bevel |
Number of Teeth | 10 |
Nominal Gear Ratio | 4:1 |
Pitch | 2mm |
Pressure Angle | 20° |