RS PRO 40 Teeth Bevel Gear, 2mm Pitch , 20° Angle , 18mm Bore

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

RS PRO Hostaform Bevel Gear

The RS PRO 4:1 metric moulded bevel gear is made from white HOSTAFORM®C. It has a pitch module of 2 and 40 teeth.
Other Information:
What are bevel gears?
Bevel Gear is a cone-shaped gear, which transmits power between two intersecting axels.
Why choose HOSTAFORM® gears?
HOSTAFORM® is a semi-crystalline, thermoplastic polymer. It is a versatile engineering plastic with good wear resistance, hardness, rigidity, excellent dimensional stability, long-term creep resistance and outstanding resistance to moisture, alkaline solutions, fuels and many chemicals.

Features and Benefits

• Standard tolerances, unless otherwise stated 0.25mm
• Shaft axis to intersect within 0.025mm
• Angular accuracy between shafts 5mins
• Mounting distance tolerance 0.05mm
• Bore tolerance H8
• Cut to the Gleason System
• 20 pressure angle
• Supplied in pairs

Certifications

• EN certified
• DIN 3964
• DIN 3967
• DIN 3971

Specificaties
Kenmerk Waarde
Module 2.0
Gear Type Bevel
Number of Teeth 40
Nominal Gear Ratio 4:1
Pitch 2mm
Pressure Angle 20°
Bore 18mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 16-12-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
24,30
(excl. BTW)
29,40
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 24,30
5 - 9
€ 23,81
10 +
€ 23,33
Related Products
The RS PRO 2:1 metric moulded bevel gear ...
Description:
The RS PRO 2:1 metric moulded bevel gear is made from white HOSTAFORM®C. It has a pitch module of 1 and 15 teeth.Other Information:What are bevel gears?Bevel Gear is a cone-shaped gear, which transmits power between two intersecting axels.Why choose ...
The RS PRO 3:1 metric moulded bevel gear ...
Description:
The RS PRO 3:1 metric moulded bevel gear is made from white HOSTAFORM®C. It has a pitch module of 1.5 and 45 teeth.Other Information:What are bevel gears?Bevel Gear is a cone-shaped gear, which transmits power between two intersecting axels.Why choose ...
Injection moulded acetal co-polymer bevel gears. Tensile strength ...
Description:
Injection moulded acetal co-polymer bevel gears. Tensile strength 75N/mm2Hardness (Rockwell R) 110-120Pitch angle 63° 26' (gear) 26° 34' (pinion)Face angle 65° 36' (gear) 30° 29' (pinion).
The RS PRO 14 teeth metric steel spur ...
Description:
The RS PRO 14 teeth metric steel spur gear has a pitch diameter of 14mm, hub diameter of 10mm and bore diameter of 6mm. The gear has a face width of 15mm. It has a module value of 1. • ...