RS PRO Steel 20 Teeth Mitre Gear, 45° Pitch , 20° Angle , 8mm Bore

Datasheets
Wetgeving en compliance
N.v.t.
Productomschrijving

Metric Mitre Gears Steel

A range of steel mitre gears providing a 1:1 gear ratio

Made from S45C induction hardened steel with a chemi-black finish
Tensile strength (min) 569 N/mm²
45° pitch angle, 48° face angle

Dimensions (mm)
Stock No A B C D E F G H I J
521-5780 4 11 - 13.9 11 5.17 3.7 7 3.4 9.4
521-5803 5 15 - 20.3 16 10.2 4.3 9 5 10.2
521-5819 6 20 25 26.4 23 11.2 8 14 6 15
521-5825 8 24 30 31.4 28 13.7 10 16 6 19
521-5831 8 21 - 26.1 20 9 6.5 11 4.24 -
521-5847 8 26 30 32.1 30 16 13 19 8 15.3
521-5869 10 30 37.5 39.6 34 16.3 11.5 19 9 19.5
521-5875 10 36 45 47.1 43 21.5 16 25 10 25.7
521-5881 10 27 32 34.8 30 15.4 11.5 19 7 -
521-5897 12 34 40 42.8 37 18.4 14 22 10 21.7
521-5904 12 40 50 52.8 40 16.4 10 20 12 26
521-5926 12 45 60 62.8 50 21.4 12.5 25 12 36
521-5932 12 34 40 43.5 35 16.7 12 21 9 -
521-5948 14 42 50 53.5 48 24.7 19 29 12 28
521-5954 16 50 62.5 66 50 20.5 12.5 26 15 34.5
521-5960 16 60 75 78.5 62 26.2 17 32 15 47.5

Note

All mitre gears are supplied as single units (i.e. not as a pair).

//media.rs-online.com/t_line/L745006-01.gif

Mitre Gears Steel

Specificaties
Kenmerk Waarde
Module 1.5
Material Steel
Gear Type Mitre
Number of Teeth 20
Nominal Gear Ratio 1:1
Pitch 45°
Pressure Angle 20°
Bore 8mm
3 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
43 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
21,91
(excl. BTW)
26,51
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 21,91
5 - 9
€ 21,23
10 +
€ 20,55
Related Products
A range of steel bevel gears. Made from ...
Description:
A range of steel bevel gears. Made from S45C induction hardened steel with a chemi-black finishTensile strength (min) 569 N/mm²20° pressure angle.
Injection moulded acetal co-polymer mitre gears giving a ...
Description:
Injection moulded acetal co-polymer mitre gears giving a gear ratio of 1:1. Tensile strength 94N/mm2Hardness (Rockwell R) 110-120Pitch angle 45°, pressure angle 49° 48'Number of teeth 20.
Injection moulded acetal co-polymer bevel gears. Tensile strength ...
Description:
Injection moulded acetal co-polymer bevel gears. Tensile strength 75N/mm2Hardness (Rockwell R) 110-120Pitch angle 63° 26' (gear) 26° 34' (pinion)Face angle 65° 36' (gear) 30° 29' (pinion).
RS Pro high quality steel spur gears in ...
Description:
RS Pro high quality steel spur gears in a range of gear ratios. Ideally used for speed reduction or increase, torque multiplication, resolution and accuracy in positioning systems. • Steel EN8 (080M40/080M46) or equivalent• Tensile strength: 569N/mm2 (min.)• 20° pressure ...