Carlo Gavazzi NFC Reader, PCB
- RS-stocknr.:
- 165-1485
- Artikelnummer Distrelec:
- 304-07-350
- Fabrikantnummer:
- ACR1252U
- Fabrikant:
- Carlo Gavazzi
Subtotaal (1 eenheid)*
€ 205,46
(excl. BTW)
€ 248,61
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- Plus verzending 9 stuk(s) vanaf 27 april 2026
- Plus verzending 18 stuk(s) vanaf 27 april 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 205,46 |
*prijsindicatie
- RS-stocknr.:
- 165-1485
- Artikelnummer Distrelec:
- 304-07-350
- Fabrikantnummer:
- ACR1252U
- Fabrikant:
- Carlo Gavazzi
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Carlo Gavazzi | |
| Product Type | NFC Reader | |
| Mount Type | PCB | |
| Terminal Type | PCB Terminal | |
| Minimum Operating Temperature | 0°C | |
| Maximum Operating Temperature | 50°C | |
| Height | 12.8mm | |
| Width | 65mm | |
| Length | 98mm | |
| Series | ACR | |
| Standards/Approvals | CCID, EN 60950/IEC 60950, PC/SC, FCC, Felica Performance Certification, REACH, USB Full Speed, RoHS 2, VCCI (Japan), ISO 7816 (SAM Slot), Microsoft WHQL, CE, ISO 14443, MIC (Japan), J-LIS (Japan), KC (Korea), NFC Forum Certification, ISO 18092 | |
| Alles selecteren | ||
|---|---|---|
Merk Carlo Gavazzi | ||
Product Type NFC Reader | ||
Mount Type PCB | ||
Terminal Type PCB Terminal | ||
Minimum Operating Temperature 0°C | ||
Maximum Operating Temperature 50°C | ||
Height 12.8mm | ||
Width 65mm | ||
Length 98mm | ||
Series ACR | ||
Standards/Approvals CCID, EN 60950/IEC 60950, PC/SC, FCC, Felica Performance Certification, REACH, USB Full Speed, RoHS 2, VCCI (Japan), ISO 7816 (SAM Slot), Microsoft WHQL, CE, ISO 14443, MIC (Japan), J-LIS (Japan), KC (Korea), NFC Forum Certification, ISO 18092 | ||
- Land van herkomst:
- CN
The DPD Series settings can easily be modified through an Android App via a smartphone/tablet or via a USB NFC Reader/Writer connected to a computer. Under and over threshold settings can be set, as well as hysteresis and time delays. They are uploaded into the DPD Series by means of its NFC configuration. Neither potentiometer settings nor DIP switches are used for the device set-up, and after it is set-up, it can be password protected, to ensure safety while in use. The DPD02DM44B is delivered with default settings for North American 3-phase 240VAC mains, whereas the DPD02DM44 is delivered with European/Asian settings for 3-phase 400VAC mains.
3-phase voltage and frequency monitoring relay
Nominal measurement range from 177-552 VAC L-L and 102-318 VAC L-N
Star or Delta mains
NFC configuration
Adjustable set-points, hysteresis, delays, AND/OR logic
Three diagnostic LEDs
Operating frequency from 45 to 440Hz
Two independent SPDT 8 Amp outputs
Gerelateerde Links
- Carlo Gavazzi Monitoring Relay DIN Rail
- STMicroelectronics NFC Reader, 32-Pin VFQFPN
- Carlo Gavazzi Monitoring Relay SPDT, DIN Rail
- Carlo Gavazzi Monitoring Relay SPDT, 230 V ac
- STMicroelectronics ST25R100-CMET NFC Reader, 24-Pin UFQFPN
- STMicroelectronics ST25R200-BMET NFC Reader, 24-Pin UFQFPN
- STMicroelectronics CR95HF-VMD5T NFC Reader, 32-Pin VFQFPN
- STMicroelectronics ST25R95-VMD5T NFC Reader, 32-Pin VFQFPN
