IR Security And Safety Deadlock Cylinder

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: TR
Productomschrijving

Euro Profile Cylinder Locks

Silver powder coated mild steel case with satin nickel plated die cast zinc bolt and latch
Satin finish, stainless steel forend and strike
Designed to match the dimensional characteristics of DIN 18251 with follower to cylinder centres at 72mm. Case pierced to accept bolt through fixings at 38-41mm centres at the follower and the cylinder position
60 mm backset
Deadbolt can be thrown and withdrawn from one or both sides as required depending on the cylinder used
Quick reversible latch on sashlock
Sashlock cylinder to latch function will operate both deadbolt and latch
Sashlock suitable for lever handles with 8mm spindle

Standards

BS8300, EN 12 209

//media.rs-online.com/t_line/L491323-01.gif
Specificaties
Kenmerk Waarde
Lock Mechanism Cylinder
Forend Finish Stainless Steel
Case Material Steel
Case Height 165mm
Case Depth 93mm
Forend Dimensions 235 x 20mm
Forend Height 235mm
Forend Width 20mm
6 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
27,03
(excl. BTW)
32,71
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 27,03
Related Products
Available in blackened steel with nitrided plunger or ...
Description:
Available in blackened steel with nitrided plunger or stainless steel with nickel plated plunger and plastic lever cover cap (with locknut version only)Cam action allows locking pin to protrude or withdrawA locking notch in either position prevents the lock rotatingM20 ...
Ideal for applications where a pre-defined positional stop ...
Description:
Ideal for applications where a pre-defined positional stop is required or positioning a workpiece against a datum faceThreaded body has a screwdriver slotAvailable in either a black oxide finish or stainless steel. Both have a retained hardened steel ballBlack oxide ...
4 pin tumbler lockNickel-plated brass housing and insert, ...
Description:
4 pin tumbler lockNickel-plated brass housing and insert, with corrosion resistant internal mechanism and zinc plated and passivate steel tongueKey withdraws in the locked position only75 combinationsLeft and right handed optionsMax panel thickness 7mm.
Five grip length latches all with 8mm 'Take ...
Description:
Five grip length latches all with 8mm 'Take Up' to accommodate different latching length requirementsThe stepped cam provides considerable leverage to fully compress and seal gasketsUse key stock no. 341-0236 (available separately)Chrome plated insert and housing, zinc and passivated steel ...