SICK DBS60 Core Series Incremental Incremental Encoder 30V, 100 ppr ppr, HTL, TTL Signal, Solid Type, 10 mm Shaft
- RS-stocknr.:
- 212-5624
- Fabrikantnummer:
- DBS60E-S4FK00100 / 1088761
- Fabrikant:
- SICK
Subtotaal (1 eenheid)*
€ 211,09
(excl. BTW)
€ 255,42
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Voorradig bij de fabrikant
- Klaar voor verzending vanaf 02 november 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 211,09 |
*prijsindicatie
- RS-stocknr.:
- 212-5624
- Fabrikantnummer:
- DBS60E-S4FK00100 / 1088761
- Fabrikant:
- SICK
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SICK | |
| Encoder Technology | Incremental | |
| Product Type | Incremental Encoder | |
| Series | DBS60 Core | |
| Pulses Per Revolution | 100ppr | |
| Maximum Revolutions | 9000rpm | |
| Output Signal Type | HTL, TTL | |
| Shaft Type | Solid | |
| Shaft Diameter | 10mm | |
| Interface Type | Incremental | |
| Terminal Type | Cable | |
| IP Rating | IP65, IP67 | |
| Maximum Supply Voltage | 30V | |
| Minimum Operating Temperature | -30°C | |
| Overall Depth | 44.35mm | |
| Standards/Approvals | EN 60068-2-27, EN 60068-2-6, EN 61000-6-2 and EN 61000-6-3, EN ISO 13849-1 | |
| Overall Width | 58mm | |
| Overall Height | 58mm | |
| Mount Type | Face | |
| Maximum Operating Temperature | 100°C | |
| Switching Frequency | 300kHz | |
| Alles selecteren | ||
|---|---|---|
Merk SICK | ||
Encoder Technology Incremental | ||
Product Type Incremental Encoder | ||
Series DBS60 Core | ||
Pulses Per Revolution 100ppr | ||
Maximum Revolutions 9000rpm | ||
Output Signal Type HTL, TTL | ||
Shaft Type Solid | ||
Shaft Diameter 10mm | ||
Interface Type Incremental | ||
Terminal Type Cable | ||
IP Rating IP65, IP67 | ||
Maximum Supply Voltage 30V | ||
Minimum Operating Temperature -30°C | ||
Overall Depth 44.35mm | ||
Standards/Approvals EN 60068-2-27, EN 60068-2-6, EN 61000-6-2 and EN 61000-6-3, EN ISO 13849-1 | ||
Overall Width 58mm | ||
Overall Height 58mm | ||
Mount Type Face | ||
Maximum Operating Temperature 100°C | ||
Switching Frequency 300kHz | ||
- Land van herkomst:
- MY
SICK DBS60 Core Series Incremental Encoder, 100 Pulses Per Revolution, 10mm Shaft Diameter - DBS60E-S4FK00100 / 1088761
This incremental encoder provides rotary position feedback for motion control and measurement systems in industrial settings. Designed for face mounting with a solid 10mm shaft, it delivers electrical Pulse outputs for speed and position sensing and operates across a wide temperature range suitable for demanding environments.
Features and Benefits:
• 100 ppr resolution delivers precise incremental position feedback
• HTL and TTL outputs enable flexible Interface compatibility
• 300 kHz switching supports high-speed counting and control
• 9000 rpm rating permits use in fast-rotating equipment
• IP65 and IP67 protection allows operation in wet and dusty conditions
• Cable termination simplifies installation in fixed assemblies
• HTL and TTL outputs enable flexible Interface compatibility
• 300 kHz switching supports high-speed counting and control
• 9000 rpm rating permits use in fast-rotating equipment
• IP65 and IP67 protection allows operation in wet and dusty conditions
• Cable termination simplifies installation in fixed assemblies
Applications
• Suitable for conveyor speed monitoring and control systems
• Ideal for closed-loop motor speed feedback in drives
• Used with PLCs for shaft position sensing in packaging machinery
• Can be used for rotational measurement in test rigs and laboratory equipment
• Suitable for integration into robotic joint encoders for motion tasks
• Ideal for closed-loop motor speed feedback in drives
• Used with PLCs for shaft position sensing in packaging machinery
• Can be used for rotational measurement in test rigs and laboratory equipment
• Suitable for integration into robotic joint encoders for motion tasks
What electrical supply constraints should be observed?
The device accepts supply voltages up to 30V and must be used within that maximum to ensure correct signal levels.
How does it handle exposure to harsh mechanical conditions?
It conforms to shock and vibration standards EN60068-2-27 and EN60068-2-6 for resistance to impact and oscillatory motion.
Which environmental immunity standards are relevant to its electromagnetic behaviour?
It meets EN61000-6-2 and EN61000-6-3 criteria for industrial immunity and emission performance in typical installations.
What are the specified operating temperature limits for continuous use?
The unit functions between -30°C and 100°C, enabling deployment in both sub-zero and elevated-temperature locations.
How is the encoder mounted and connected in an installation?
It is designed for face mounting with a solid 10mm shaft and uses a cable Terminal for electrical connection.
Gerelateerde Links
- SICK DBS60 Series Incremental Incremental Encoder 30V TTL Through Hollow Type, 0.625 in
- SICK DBS60 Core Series Incremental Incremental Encoder 30V TTL Through Hollow Shaft Type,
- SICK DBS60 Core Series Incremental Incremental Encoder 30V HTL Hollow Type, 15.87 mm Shaft
- SICK DBS60 Core Series Incremental Incremental Encoder 30V HTL Solid Type, 10 mm Shaft
- SICK DBS60 Core Series Incremental Incremental Encoder 30V HTL Solid Type, 10 mm Shaft
- SICK DBS60 Core Series Incremental Incremental Encoder 30V TTL Hollow Type, 15.87 mm Shaft
- SICK DBS60 Core Series Incremental Incremental Encoder 30V HTL Solid Type, 6 mm Shaft
- SICK DBS60 Core Series Incremental Incremental Encoder 30V TTL Solid Type, 6 mm Shaft