DFRobot DFR0305 Romeo BLE - Arduino Robot DC Controller Board for ATmega328P, L298N, TI CC2540 for Arduino UNO Robots

  • RS-stocknr. 124-4687
  • Fabrikantnummer DFR0305
  • Fabrikant DFRobot
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

Romeo BLE Arduino Motor Driver Board

The Romeo BLE is a all in one robot controller board with integrated CC2540 Bluetooth 4.0 (BLE) chip. The board design makes it suitable for robotic applications and the new code can be uploaded without a need to plug in a cable.

Features:
•Microcontroller: ATmega328P
•Bootloader: Arduino UNO
•On-board BLE chip: TI CC2540
•Transmission range: 70 m in free space
•Support bluetooth remote update the Arduino program
•Support Bluetooth HID
•Support iBeacon
•Support AT command to config the BLE
•Support Transparent communication through Serial
•Support the master-salve machine switch
•Support USB update BLE chip program
•14 Digital I/O ports
•6 PWM Outputs (Pin11, Pin10, Pin9, Pin6, Pin5, Pin3)
•8 10-bit analogue input ports
•3 I2Cs
•2 way H-bridged Motor Driver with 2A maximum current
•5 Buttons
•Support Male and Female Pin Header
•Integrated sockets for APC220 RF Module
•Power Supply Port: USB or DC2.1
•External Power Supply Range: 5 to 23 V
•DC output: 5V/3.3V
•Auto sensing/switching external power input
•Size: 94 x 80 mm(3.70"x3.15")

Romeo family

Specificaties
Kenmerk Waarde
Kit Name Romeo BLE - Arduino Robot
Kit Classification Controller Board
For Use With Arduino UNO Robots
Motor Type DC
Featured Device ATmega328P, L298N, TI CC2540
130 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
35,27
(excl. BTW)
42,68
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 35,27
Related Products
This colour 2.4” TFT display has 4 bright ...
Description:
This colour 2.4” TFT display has 4 bright white LED backlight and 240 x 320 pixels with individual RGB pixel control. It has a resistive touchscreen to detect finger presses anywhere on the screen. The built-in controller has RAM buffering ...
The STEVAL-FCU001V1 is designed to support quadcopter drone ...
Description:
The STEVAL-FCU001V1 is designed to support quadcopter drone designers. A complete sample FW project allows the designer to begin flying small and medium size quadcopters (with brushed or brushless DC motors) immediately and evaluate the performance of the IMU sensors ...
The PICDEM MC LV Development Board provides a ...
Description:
The PICDEM MC LV Development Board provides a cost-effective method of evaluating and developing sensored or sensorless brushless DC (BLDC) motor control applications. The board supports Microchip's 28-pin, PIC18F microcontrollers and dsPIC30F Digital Signal Controllers. It is capable of controlling ...
The ISL68200DEMO1Z is a Demonstration Board, based on ...
Description:
The ISL68200DEMO1Z is a Demonstration Board, based on the ISL68200, a single phase R4 technology Digital Hybrid PWM Controller with integrated Driver, and PMBus/SMBus/I²C and PFM Interface. Transient performance, fault protections, DC/AC regulations, PMBus programming, power sequencing, margining and other ...