STMicroelectronics L293D, Brushed Motor Driver IC, 36 V 0.6A 16-Pin, PDIP

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Load Driver ICs, STMicroelectronics

STMicroelectronics L293D Motor Driver IC

STMicroelectronics L293D Push-Pull four channel driver with diodes is assembled in a 16 lead plastic package which has 4 center pins connected together and used for heatsinking. This is a monolithic integrated high voltage, high current four channel driver. This device has a H-Bridge motor driver integrated circuit(IC) L293D is a typical Motor driver or Motor Driver IC which allows DC motor to drive on either direction

Features

600mA output current capability per channel

Overprotection protection

Internal clamp diodes

Can drive small and medium motors

Control a set of two motors simultaneously

Relay and Inductive Load Drivers

Specificaties
Kenmerk Waarde
Motor Type Brushed DC
Output Configuration Dual Full Bridge
Maximum IGBT Collector Current 0.6A
Maximum Collector Emitter Voltage 36 V
Mounting Type Through Hole
Package Type PDIP
Maximum Operating Supply Voltage 36 V
Pin Count 16
Minimum Operating Supply Voltage 4.5 V
Dimensions 20 x 7.1 x 5.1mm
Length 20mm
Minimum Operating Temperature -40 °C
Height 5.1mm
Maximum Operating Temperature +150 °C
Width 7.1mm
795 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (Supplied in a Tube)
2,10
(excl. BTW)
2,54
(incl. BTW)
Aantal stuks
Per stuk
10 - 49
€ 2,10
50 - 149
€ 1,96
150 - 499
€ 1,82
500 +
€ 1,64
Verpakkingsopties
Related Products
The Intelligent Power Module (IPM) is a fully ...
Description:
The Intelligent Power Module (IPM) is a fully integrated three phase inverter power stage. It is best suited for driving permanent magnet synchronous motors (PMSM), brushless-DC (BLDC) motors and AC asynchronous motors. 3-Phase IGBT Motor Drive module with integrated driversThree ...
ROHM offers a wide lineup of H-bridge drivers ...
Description:
ROHM offers a wide lineup of H-bridge drivers in different supply voltages (7V/18V/36V) and output currents (0.5A/1A/2A) to meet the needs of a variety of applications. Our standard products also contain a VREF variable function that contributes to lower power ...
The IFX9201SG a general purpose 6A H-bridge for ...
Description:
The IFX9201SG a general purpose 6A H-bridge for industrial applications, home appliance and building automation, power tools battery management and medical applications, designed for the control of small DC motors and inductive loads is available from Infineon now. The outputs ...
The BP5293-12 series is one packaged 3terminals Buck ...
Description:
The BP5293-12 series is one packaged 3terminals Buck type DC/DC Converter built-in all parts of DC/DC converter. High efficiency compared with 3 terminals regulator, and not necessary to heat sink. It’s able to rearrange without redesign PCB, because of pin ...