Phoenix Contact CLIPLINE 28 V dc, 240 V ac Motor Protection Circuit Breaker -

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CZ
Productomschrijving

Thermomagnetic Circuit Breakers UT-TMC

The UT 6-TMC thermomagnetic circuit breakers ensure high system availability with the ability to re-connect with a clear status indication. They become integrated in the CLIPLINE complete system via the plug-in bridge shaft and can be clearly allocated with the large-surface centre marking.

Compact design, only 12.3 mm wide
Large-surface marking possibilities, 1 per connection point and 1 on top of the device
Double plug-in bridge shaft
Available in current ranges 0.5 A to 16 A

CLIPLINE COMBI terminal blocks

A highly flexible system of terminal blocks featuring a disconnectable plug-in zone and 4 connection methods: screw (UT), spring-cage (ST), push-in (DT) and self-stripping (QT). The entire range is standardised. These four connections methods can be freely combined to connect terminal blocks and pluggable connectors, whatever their connector type. Both the bases and connectors are protected from coming into contact with hands. Self-stripping connections (QT-COMBI): Wiring time is reduced by up to 60%, as cables need not be stripped.A screwdriver is used to lock the self-stripping mechanism. Spring terminals (ST - COMBI): The connection point is opened using a screwdriver to lever the spring. This technology provides constant contact force for vibration-proof use. Screw connection (UT - COMBI): Universal terminal enabling a multi-conductor connection.

Specificaties
Kenmerk Waarde
Range CLIPLINE
Terminal Type Screw
Voltage Rating 28 V dc, 240 V ac
Length 86mm
Width 12.3mm
Depth 96mm
Dimensions 86 x 12.3 x 96 mm
Series UT 6-TMC M 0.5A
60 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
11,29
(excl. BTW)
13,66
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 11,29
Related Products
The UT 6-TMC thermomagnetic circuit breakers ensure high ...
Description:
The UT 6-TMC thermomagnetic circuit breakers ensure high system availability with the ability to re-connect with a clear status indication. They become integrated in the CLIPLINE complete system via the plug-in bridge shaft and can be clearly allocated with the ...
Circuit breaker 3VA1 IEC frame 160 breaking capacity ...
Description:
Circuit breaker 3VA1 IEC frame 160 breaking capacity class M Icu=55kA @ 415V 3-pole, line protection TM210, FTFM, In=125A overload protection Ir=125A fixed short-circuit protection Ii=10 x In clamp connection.
DIN rail mounted, mechanically reset protection devices.Transformer short ...
Description:
DIN rail mounted, mechanically reset protection devices.Transformer short circuit and overload protectionThe short circuit release is set to 20 x Iu, so even transformers that have high inrush currents have protectionRotary handle for ease of trip indication after a fault ...
Covers motors up to 16A (7.5kW)Local isolatorProtects against ...
Description:
Covers motors up to 16A (7.5kW)Local isolatorProtects against overloads, short circuits, phase failure and faults in cabling or wiringThese Motor Starters can be used in conjunction with ABB Contactors, stock no. 445-0897 typicallyAccessories available from auxiliary/signal contacts to under voltage ...