Fluke Multimeter Current Clamp Adapter

  • RS-stocknr. 237-4224
  • Fabrikantnummer i1010
  • Fabrikant Fluke
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: TH
Productomschrijving

Fluke Current Probes

Rugged current clamp adaptor suitable for use with multimeters to give non intrusive measurement of d.c. and a.c. current. Integral 1.2m 4mm shrouded plug lead.

Jaws accept conductor size of 1 x 30mm or 2 x 25mm dia.
d.c. current zero control for nulling out jaw/sensor offset
Superior noise immunity allows measurement in electrically noisy environments, such as adjustable speed drive line-side and load currents
Shielded, heat-resistant silicon rubber cable connects clamp to digital multimeter
Battery check mode
Compatible with meter input impedance ≥1MΩ
Conforms to IEC 1010-1 Cat III 600V

Supplied With: 9V PP3 alkaline battery and operators manual.

Specificaties
Kenmerk Waarde
Adapter Type AC/DC
Maximum DC Current 1000A
Maximum AC Current 600A ac
Best Accuracy ±2% + 0.5 A
Maximum Conductor Size 30mm
Safety Category CAT III 600 V
Output Type Voltage
Connector Type 4 mm Plug
Battery Type 9V
Battery Life 60 h
Maximum Operating Temperature +50°C
Minimum Operating Temperature -10°C
Safety Category Voltage 600V
Safety Category Level CAT III
Model Number p I1010
7 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
11 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
488,00
(excl. BTW)
590,48
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 488,00
Related Products
Switchcraft 2 conductor DC power plugs with a ...
Description:
Switchcraft 2 conductor DC power plugs with a hollow centre pin and molded plastic covers for use with 2.1mm and 2.5mm Jacks. The sleeve terminal also serves as a cable clamp. Available in red or black cover versions and in ...
The METRAHIT.ISO multimeter is a rugged portable measuring ...
Description:
The METRAHIT.ISO multimeter is a rugged portable measuring instrument for use in the field. It is suitable for servicing household appliance, machines (e.g. forklifts) and systems (e.g. photovoltaic). Insulation resistance measurement up to 3.1 GΩ with interference voltage detection - ...
ICA39T from the RS Pro range of current ...
Description:
ICA39T from the RS Pro range of current clamp adapters. 1.9% basic D CA / A CA accuracyNon-intrusive transducingUp to 29 mm Diameter conductorShock Proof: 5 ft dropCoiled cable output plugsErgonomically designed jaw and triggerAC-DC 1000 A capabilityAuto-zero key for ...
RS Pro ICA 15 AC Current adapter is ...
Description:
RS Pro ICA 15 AC Current adapter is designed to plug into the IDM 17 probe style multimeter. AC 300 A capability1.9% basic ACA accuracyNon-intrusive transducingUp to 29 mm dia. conductorErgonomically designed jaw and triggerHand guard designedCAT.II 600 V Safety ...