Chauvin Arnoux PO1120074A Multimeter Current Clamp Adapter, 450mA dc, 300mA ac, 3.9mm

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: US
Productomschrijving

K1 and K2 low-current probes

Current probes to measure low DC and AC currents.
Easily adapted to all 19 mm standard spacing multimeters.
Zero reset using a thumb wheel with disable feature.
2 LEDs display overload (red LED) and the correct battery level (green LED).
Applications: loop measurements 4 → 20 mA without opening the circuit, low current measurements, default current measurements etc.


Standard: IEC 1010-1, 600 V Cat. III, deg. 2 if used with a multimeter of the same category.

Specificaties
Kenmerk Waarde
Adapter Type AC/DC
Maximum DC Current 450mA
Maximum AC Current 300mA ac
Best Accuracy ±1 %
Resolution 50 (DC) μA, 100 (AC) μA
Maximum Conductor Size 3.9mm
Safety Category CAT II 300 V
Output Type Current
Connector Type 4 mm Plug
Battery Type 9V
Battery Life 20 h
Cable Length Extended 1.5m
Maximum Operating Temperature +55°C
Minimum Operating Temperature -10°C
Safety Category Level CAT II
Model Number p PO1120074A
Safety Category Voltage 300V
1 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
3 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
516,00
(excl. BTW)
624,36
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 516,00
Kalibratie-opties
Related Products
U1701A & U1701B are ergonomic handheld capacitance LCR ...
Description:
U1701A & U1701B are ergonomic handheld capacitance LCR meters, user friendly with overmold and built and tested to be robust for harsh industrial environments. Efficient capacitor sorting with no need to set and reset standard reference, the meter features up ...
ICA39T from the RS Pro range of current ...
Description:
ICA39T from the RS Pro range of current clamp adapters. 1.9% basic D CA / A CA accuracyNon-intrusive transducingUp to 29 mm Diameter conductorShock Proof: 5 ft dropCoiled cable output plugsErgonomically designed jaw and triggerAC-DC 1000 A capabilityAuto-zero key for ...
Rugged current clamp adaptor suitable for use with ...
Description:
Rugged current clamp adaptor suitable for use with multimeters to give non intrusive measurement of d.c. and a.c. current. Integral 1.2m 4mm shrouded plug lead. Jaws accept conductor size of 1 x 30mm or 2 x 25mm dia.d.c. current zero ...
The i30 may be used in conjunction with ...
Description:
The i30 may be used in conjunction with multimeters, recorders and other suitable recording instruments for accurate non-intrusive ac & dc current measurement.,Applications include: inverters, switch mode power supplies, industrial controllers, automotive leakage currents and other applications requiring accurate ...