Fluke I30 Multimeter Current Clamp Adapter, 30A dc, 30A ac, 19mm

  • RS-stocknr. 653-6763
  • Fabrikantnummer i30
  • Fabrikant Fluke
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: CN
Productomschrijving

i30 30A High Resolution, High Bandwidth Current Probe

The i30 may be used in conjunction with multimeters, recorders and other suitable recording instruments for accurate non-intrusive ac & dc current measurement.,Applications include: inverters, switch mode power supplies, industrial controllers, automotive leakage currents and other applications requiring accurate isolated current measurement.

Hall effect sensing of a.c. and d.c. current
Power LED warns of low battery by flashing
Zero adjust knob to accommodate offsets
1.5m flying lead terminated with 4mm shrouded plugs
Designed to meet EN61010-1, EN61010-2-032 installation CAT III 300V
Withstands overloads to 500A

Supplied with

Alkaline PP3 battery and operators manual.

Warning

  • Use of the probe on uninsulated conductors is limited to 300V ac rms or dc and frequencies below 1 kHz.
Specificaties
Kenmerk Waarde
Adapter Type AC/DC
Maximum DC Current 30A
Maximum AC Current 30A ac
Best Accuracy ±1% + 2 mA
Resolution 1 mA
Maximum Conductor Size 19mm
Safety Category CAT III 300 V
Output Type Current
Connector Type 4 mm Plug
Battery Type 9V
Battery Life 30 h
Cable Length Extended 1.5m
Maximum Operating Temperature +50°C
Minimum Operating Temperature 0°C
Safety Category Voltage 300V
Safety Category Level CAT III
Model Number p I30
8 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
12 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
453,00
(excl. BTW)
548,13
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 453,00
Related Products
ICA39T from the RS Pro range of current ...
Description:
ICA39T from the RS Pro range of current clamp adapters. 1.9% basic D CA / A CA accuracyNon-intrusive transducingUp to 29 mm Diameter conductorShock Proof: 5 ft dropCoiled cable output plugsErgonomically designed jaw and triggerAC-DC 1000 A capabilityAuto-zero key for ...
RS Pro ICA 15 AC Current adapter is ...
Description:
RS Pro ICA 15 AC Current adapter is designed to plug into the IDM 17 probe style multimeter. AC 300 A capability1.9% basic ACA accuracyNon-intrusive transducingUp to 29 mm dia. conductorErgonomically designed jaw and triggerHand guard designedCAT.II 600 V Safety ...
These compact, lightweight and ergonomic sensors of varying ...
Description:
These compact, lightweight and ergonomic sensors of varying diameters are capable of clamping all types of conductors, whatever their number, dimensions or shape (bars, etc.). Due to their flexibility, they can be used in any location, however cramped. They are ...
For safe non intrusive AC current measurements on ...
Description:
For safe non intrusive AC current measurements on Keysight handheld digital multimeters and handheld oscilloscopes. Selectable dual range (40A and 400A) AC current clamp. 10mVac/A and 1m Vac/A output. BNC-to-banana plug provided for use with digital mul.