Keysight Technologies U1583B Multimeter Current Clamp Adapter AC, 400A ac, 30mm With UKAS Calibration

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: MY
Productomschrijving

Keysight U1583B 400A ac Current Clamp

For safe non intrusive AC current measurements on Keysight handheld digital multimeters and handheld oscilloscopes.
Selectable dual range (40A and 400A) AC current clamp.
10mVac/A and 1m Vac/A output.
BNC-to-banana plug provided for use with digital mul

Note

This current clamp is designed to be used on insulated conductors up to 400 A, 600 V CAT III and on bare conductors of up to 30 VAC rms or 60 VDC

Specificaties
Kenmerk Waarde
Adapter Type AC
Maximum AC Current 400A ac
Best Accuracy ±11.5% + 0.5 A
Resolution 1 mV/A
Maximum Conductor Size 30mm
Calibrated UKAS
Safety Category CAT III 600 V
Output Type Current
Connector Type BNC to Banana Plug
Cable Length Extended 1.5m
Maximum Operating Temperature +55°C
Minimum Operating Temperature -10°C
Safety Category Voltage 600V
Model Number p U1583B
Safety Category Level CAT III
10 op voorraad - levertijd is 1 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
264,00
(excl. BTW)
319,44
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 264,00
Related Products
Rugged current clamp adaptor suitable for use with ...
Description:
Rugged current clamp adaptor suitable for use with multimeters to give non intrusive measurement of d.c. and a.c. current. Integral 1.2m 4mm shrouded plug lead. Jaws accept conductor size of 1 x 30mm or 2 x 25mm dia.d.c. current zero ...
Precision current clamp suitable for non-intrusive current measurements ...
Description:
Precision current clamp suitable for non-intrusive current measurements in electrical electronic, process and light industrial systems automotive systems, battery performance testing and battery charging systems.30A ac/dc measurement range Simple push button auto zeroAuto power off conserves battery lifewide ...
The MA200 insulated current probes are equipped with ...
Description:
The MA200 insulated current probes are equipped with a BNC output and can be connected to all types of oscilloscopes. They offer high bandwidth and are particularly suitable for viewing transient signals. The MA200 models can notably be used to ...
Standard: IEC 1010-1, 600 V Cat. III, deg. ...
Description:
Standard: IEC 1010-1, 600 V Cat. III, deg. 2 if used with a multimeter of the same category. Current probes to measure low DC and AC currents.Easily adapted to all 19 mm standard spacing multimeters.Zero reset using a thumb wheel ...