Ferrogard 440N Magnetic Safety Switch, Plastic, 110 V ac

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DO
Productomschrijving

Ferrogard 6, 9 & 10 Slim Non Contact Safety Switch

The Ferrogard FRS 6, 9 and 10 are magnetically actuated non-contact safety switches which offer reliability and a high tolerance to misalignment. Designed to be installed on a guard door, the action of the magnetic actuator being removed from the switch opens the N.C. safety contacts therefore isolating the control power to the machines primary control element. Moulded in ABS plastic with a slim rectangular housing to accommodate narrow mounting areas and sealed to IP67 (NEMA 6P), these non-contact switches are ideal for wet environments. They have two active sensing faces allowing more flexible mounting options.

Slim housings to accomodate narrow mounting areas
Two active sensing faces allowing more flexible mounting options
Operating distance for safety contacts: make 12mm; break 23mm
Operating temperature range: -10°C to +65°C
M4 mounting
IP67 rating (NEMA 6P)
Cat. 1 Device per EN954-1 Dual channel interlocks suitable for Cat. 3 or 4 systems

Standards

EN954-1, ISO13849-1, IEC/EN60204-1, NFPA79, EN1088, ISO14119, ANSI B11.19, AS4024.1.

Approvals

CE Marked for all applicable directives and cULus.

Specificaties
Kenmerk Waarde
Supply Voltage 110 V ac
Safety Contacts NC
Housing Material Plastic
Connection Type 2m cable
Range Ferrogard
Series 440N
IP Rating IP67
Actuator Included Yes
Depth 16mm
Sensor Principle Magnetic
Width 19mm
Housing Colour Red
Length 84mm
Safety Category 1
Actuator Type Magnetic
Dimensions 84 x 19 x 16 mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 23-12-2019, met een levertijd van 2 à 3 werkdagen.
Prijs Each
108,00
(excl. BTW)
130,68
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 108,00
Related Products
The Sipha S1 is a non-contact switch in ...
Description:
The Sipha S1 is a non-contact switch in a miniature ABS housing with moulded-in brackets, making it extremely versatile and simple to install. It incorporates several magnetically sensitive elements, which must be triggered in a particular sequence to operate correctly. ...
The design of the Sipha S4 non-contact switch ...
Description:
The design of the Sipha S4 non-contact switch incorporates several magnetically sensitive elements which must be triggered in a particular sequence to operate correctly. The sensor is designed for use with its own actuator, helping prevent defeat by means of ...
The Ferrogard FRS 13 and 14 are magnetically ...
Description:
The Ferrogard FRS 13 and 14 are magnetically actuated non-contact safety switches which offer reliability and a high tolerance to misalignment. Designed to be installed on a guard door, the action of the magnetic actuator being removed from the switch ...
Mounting dimensions identical to best-selling AZ163 cable entries ...
Description:
Mounting dimensions identical to best-selling AZ163 cable entries M20 x 1.5IP67 protectionControl category up to 4 to EN954-1Suitable for food processing industryDimensions: L39 x W52 x H90 mm.