HYGIECODE MMC-H Magnetic Safety Switch, 316 Stainless Steel, 24 V dc

  • RS-stocknr. 123-7525
  • Fabrikantnummer 131106
  • Fabrikant IDEM
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

IDEM HYGIECODE LMC Non Contact Safety Switch

The HYGIECODE MMC-H safety switch has been developed for non-contact interlocking of hinged, sliding or removable guard doors.
It is ideal for applications that require a wide tolerance to misalignment, high switching capacity or high level of hygiene.
When used with a dual channel safety relay, this safety switch can be used to provide up to PLe/Category 4 to ISO13849-1.

Features and Benefits

Coded magnetic actuation
Stainless steel 316 housing mirror polished (Ra4)
No food trap areas
IP67 / IP69K protection
Suitable for CIP cleaning - Food Splash Zones EHEDG Guidelines
Resistant to high temperature hosing and detergent wash down
Compact and robust fitting for small guard applications
Through hole fixing to enable front mounting
Can be mounted unobtrusively in channels or behind doors
Cost-effective interlock solution
Up to PLe ISO 13849-1
LED indication
10 mm wide sensing
22 mm fixing centres

Applications

The HYGIECODE MMC-H Non-contact Safety Switch is designed for use in general factory automation, packaging and some food processing industries.

Note

The normally closed (NC) circuits are closed when the guard is closed and the actuator is present.

Standards

EN1088 (ISO 14119), EN 60947-5-1, EN 60204-1, ISO 13849-1, EN 62061, UL 508.

Approvals

CE, cULus, TUV.

Supplied with

Actuator.

Specificaties
Kenmerk Waarde
Supply Voltage 24 V dc
Safety Contacts 2NC
Housing Material 316 Stainless Steel
Auxiliary Contacts NO
Connection Type 5m cable
Switch Type Rectangular
Range HYGIECODE
Terminal Type Cable
Series MMC-H
Switching Distance 8 (Close) mm, 12 (Open) mm
IP Rating IP67, IP69K
Supply Current 200 mA
Actuator Included Yes
Number of Approach Directions 2
Standards Met CE, CULus Listed, TUV Certified
Length 45mm
Sensor Principle Magnetic
Safety Category 4
Depth 26mm
Actuator Type Coded
Dimensions 45 x 15 x 26 mm
Width 15mm
7 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
114,30
(excl. BTW)
138,30
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 114,30
Related Products
Different types of coded magnetic switchesManipulation safety by ...
Description:
Different types of coded magnetic switchesManipulation safety by multi-codingRedundance by NO and NC contactsCannot be operated with conventional magnets3, 6 and 9 m cable or connector versionsSturdy plastic enclosuresSwitching distances 3 or 4 mm, depending on typeNO contact and NC ...
The MZM100 Safety switch from Schmersal has a ...
Description:
The MZM100 Safety switch from Schmersal has a solenoid interlock without a positive-linked mechanical locking mechanism. It uses an electromagnet to generate a 500-N holding force and then transmits the signal “interlock locked” to the safety-monitoring module. The forced-closed operating ...
Bistable, motor-driven systemClamping force 10.000 NRelease possible against ...
Description:
Bistable, motor-driven systemClamping force 10.000 NRelease possible against lateral forces up to 300 NPL e / cat. 4 / SIL 3 for interlocking and guard locking functionTwo-channel input signal of the guard locking functionOperation on P/P- and P/N-switching outputsHigh tolerance ...
The Schneider XCS-DMR coded magnetic safety switches are ...
Description:
The Schneider XCS-DMR coded magnetic safety switches are designed for monitoring the doors, covers and guards of industrial machines with imprecise guiding and low inertia. These safety switches are ideally suited for machines subjected to frequent washing or liquid spray. ...