SRF RFID Safety Switch, PA66/PA6, 24 V

  • RS-stocknr. 179-0484
  • Fabrikantnummer 6075687078
  • Fabrikant Bernstein AG
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Bernstein AG RFID safety switch

The Bernstein AG RFID safety switch has a non-contact safety sensor that monitors moveable safety guards, such as doors, flaps and hoods. It belongs to the SRF series of safety switches. It is suitable for all coding levels. With its innovative diagnostic system, the RFID device makes safety circuits suitable for Industry 4.0. The system provides a multitude of diagnostic data of each sensor, even in a series connection, to support smart production.

Features and Benefits

• Actuator SRF suitable for all coding levels
• Compact: small in size, flexible in use
• Cost-saving: Thanks to a four-wire unshielded standard connection cable from sensor to sensor
• Reading diagnostics information through Android smartphone via NFC interface
• Safe: up to PL e - even in series connection, with high default protection
• Series connection of the sensors through internal safety electronics without compromising the safety level
• Simple and specific maintenance thanks to pre-failure monitoring
• Transmission of data via I/O Link interface

Applications

• Factory automation
• Food processing industry
• Industrial robots
• Machine guard
• Packaging
• Protective door

Certifications

• IC certified
• IEC 61508
• IEC 61508
• IEC 62061: 2013
• IEC 62061:2013
• IP69 rating
• ISO certified
• TÜV certified

Specificaties
Kenmerk Waarde
Supply Voltage 24 V
Housing Material PA66/PA6
Switch Type Non-Contact Safety Sensor
Series SRF
Switching Distance 13 mm
IP Rating IP69
Supply Current 100 mA
Actuator Included Yes
Sensor Principle RFID
Dimensions 26 x 15 x 36 mm
Length 26mm
Width 15mm
Depth 36mm
Safety Category Class III
Housing Colour Red
Actuator Type Coded, Unique Coded
7 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
12,42
(excl. BTW)
15,03
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 12,42
Related Products
The SensaGuard Non-Contact Switch is PLe, SIL 3 ...
Description:
The SensaGuard Non-Contact Switch is PLe, SIL 3 and Cat 4 rated and is intended for use with sliding, hinge or lift-off machine guard doors. These safety switches are based on RFID (Radio Frequency IDentification) technology for coding and inductive ...
The F3S-TGR non contact safety switches are designed ...
Description:
The F3S-TGR non contact safety switches are designed to interlock hinge, sliding or removable guard doors. Plastic and stainless steel switches are available, the latter are ideally suited to high hygiene demands in the food industry. The switches have a ...
the Str1 transponder safety switch has monitored semiconductor ...
Description:
the Str1 transponder safety switch has monitored semiconductor outputs (oSSds) and can be safely connected either individually or in series. It can be used for applications where a high level of manipulation protection is required. the Str1 is available with ...
The Telemecanique sensors XCSRC series RFID safety switch ...
Description:
The Telemecanique sensors XCSRC series RFID safety switch is a 24VDC contactless switch with 2 NO contacts. The RFID safety switch is ideal for applications where there cannot be any contact between the switch and the actuator. Also, it is ...