Ferrogard 440N Magnetic Safety Switch, Plastic, 24 V dc

Datasheets
Wetgeving en compliance
N.v.t.
Productomschrijving

Ferrogard 1, 2, 20 & 21 Non Contact Safety Switch

The Ferrogard FRS 1, 2, 20 and 21 are magnetically actuated non-contact safety switches which offer reliability and a high tolerance to misalignment. Designed to be installed on a guard door, the action of the magnetic actuator being removed from the switch opens the N.C. safety contacts therefore isolating the control power to the machines primary control element. Made from moulded ABS with a rectangular housing and sealed to IP67 (NEMA 6P), these non-contact switches are ideal for wet environments.

Non-contact actuation
High tolerance to misalignment
Plastic rectangular housing
Cable or quick-disconnect (QD) connections
M4 mountable in any position
Operating distance for safety contacts - make;12mm, break;23mm
Operating temperature range: -10°C to +65°C
Sealed to IP67
Cat. 1 device per EN 954-1 dual channel interlocks suitable for Cat. 3 or 4 systems

Standards

EN954-1, ISO13849-1, IEC/EN60204-1, NFPA79, EN1088, ISO14119, ANSI B11.19, AS4024.1.

Approvals

CE Marked for all applicable directives and cULus.

//media.rs-online.com/t_line/L2963155-30.gif
//media.rs-online.com/t_line/L2963161-30.gif

Note

This safety device can be used with Guardlink, a new safety linking technology from Allen Bradley Guardmaster.
Guardlink simplifies and reduces the connection time of the safety system, whilst providing real-time diagnostic information over Ethernet IP. This makes it simple to identify the location of the device that has tripped the safety system, thus reducing downtime, and improving the machines overall efficiency. For more details, please go to the Guardlink brochure.

Specificaties
Kenmerk Waarde
Supply Voltage 24 V dc
Safety Contacts 2NC
Housing Material Plastic
Connection Type 4-Pin Micro QD
Switch Type Safety
Range Ferrogard
Series 440N
Switching Distance 12 mm, 23 mm
IP Rating IP67
Actuator Included Yes
Actuator Type Magnetic
Sensor Principle Magnetic
Depth 15mm
Dimensions 76 x 30 x 15 mm
Length 76mm
Safety Category 1
Housing Colour Red
Width 30mm
8 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
21 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
219,00
(excl. BTW)
264,99
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 219,00
Related Products
The Allen Bradley GuardMaster 440N series magnetic safety ...
Description:
The Allen Bradley GuardMaster 440N series magnetic safety switch has a supply voltage rating of 24VDC at 1A current. This switch comes with FRS14 housings and a 4m cable. It offers reliability together with tolerance to misalignment. It is designed ...
Smallest designActuation only possible with BPS260, available separatelyLeft-hand ...
Description:
Smallest designActuation only possible with BPS260, available separatelyLeft-hand or right-hand side versions for door-mountingControl category up to 4 to EN954-1IP67 protection Connector 8 mm, 6-pole, latching interlockingDimensions: L13 x W26 x H36 mm.
The Pilz PSENcode series non-contact safety switch has ...
Description:
The Pilz PSENcode series non-contact safety switch has an assured switching distance of 15mm. It has 2OSSD RFIDsafety outputs. It is coded and the only switch with an actuator from the PSEN cs3.1 series. Supplied with actuatorCaution: EN60947-5-3 standard is ...
Just one safety switch is sufficient for applications ...
Description:
Just one safety switch is sufficient for applications up to Cat 4 of EN954-1 - saving on wiringPossible to provide protection against defeat in accordance with VDE 060 by concealing the installationSimplified installation and adjustmentFor use in EX area Category ...