BNS33 Magnetic Safety Switch, Stainless Steel, 100 V ac/dc

  • RS-stocknr. 617-5150
  • Fabrikantnummer BNS 33S-12Z
  • Fabrikant Schmersal
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

BNS 33S, Coded, Stainless Steel IP69K

Control category up to 4 to EN954-1 in combination with a safety monitoring module
IP69K protection, cable connection suitable for food industry (LiYY)
Coded switch, actuation only possible with BPS33S actuating magnet
Dimensions: L7.5 x W27 x H88 mm

Note

Actuator must be ordered separately

Caution

EN60947-5-3 standard is only met if entire system consisting of safety sensor (BNS33S), magnet (BPS33S) and a safety monitoring module (AES) is used.

Standards

IEC/EN60947-5-3, BG-GS-ET-14

Note

Actuator must be ordered separately, see accessories

Standards

IEC/EN60947-5-3, BG-GS-ET-14

Caution

EN60947-5-3 standard is only met if entire system consisting of safety sensor (BNS33S), magnet (BPS33S) and a safety monitoring module (AES) is used.

Specificaties
Kenmerk Waarde
Supply Voltage 100 V ac/dc
Housing Material Stainless Steel
Switch Type Safety
Terminal Type Cable
Series BNS33
Switching Distance 8 mm, 18 mm
IP Rating IP69K
Actuator Included No
Sensor Principle Magnetic
Depth 13mm
Dimensions 88 x 50 x 13 mm
Length 88mm
Safety Category 4
Width 50mm
Actuator Type Coded
15 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
27 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
77,21
(excl. BTW)
93,42
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 77,21
Related Products
Thermoplastic enclosureConcealed mounting possibleInsensitive to transverse misalignment88 mm ...
Description:
Thermoplastic enclosureConcealed mounting possibleInsensitive to transverse misalignment88 mm x 25 mm x 13 mmLong lifeno mechanical wearInsensitive to soilingAS-Interface Safety at Work availableIndividual contact outlet.
The Sipha S2 is a non-contact switch in ...
Description:
The Sipha S2 is a non-contact switch in a slim ABS housing with moulded-in brackets, making it extremely versatile and simple to install. It incorporates several magnetically sensitive elements, which must be triggered in a particular sequence to operate correctly. ...
The Sipha S1 is a non-contact switch in ...
Description:
The Sipha S1 is a non-contact switch in a miniature ABS housing with moulded-in brackets, making it extremely versatile and simple to install. It incorporates several magnetically sensitive elements, which must be triggered in a particular sequence to operate correctly. ...
The design of the Sipha S4 non-contact switch ...
Description:
The design of the Sipha S4 non-contact switch incorporates several magnetically sensitive elements which must be triggered in a particular sequence to operate correctly. The sensor is designed for use with its own actuator, helping prevent defeat by means of ...