Eden Eva 2TLA Safety Switch, Plastic, 24 V dc

  • RS-stocknr. 733-2458
  • Fabrikantnummer 2TLA020046R0000
  • Fabrikant ABB
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Vital Non-Contact Switches IP67/69K

Eden - Adam and Eva from ABB is a non-contact safety sensor for use on interlocked gates, hatches etc. A coded signal is transmitted from the control device Vital or from the safety PLC Pluto via Adam to Eva which modifies the signal and sends it back again. The maximum sensing distance between Adam and Eva from ABB is 15 mm ± 2 mm.

Safety category 4 according to EN 954-1/EN ISO 13849-1 together with Vital or Pluto from ABB
Non-contact detection, large sensing distance 0 → 15 mm ± 2 mm
Up to 30 sensors connected in series to Vital at safety category 4
Versitile mounting, 360° detection
Protection class of both IP67 and IP69K versions available
Signal will penetrate through non-metallic materials (wood, plastic, etc)
Safety light beams, E-stops and Eden can be connected in the same safety circuit together with Vital or Pluto according to safety category 4 (EN 954-1/EN ISO 13849-1)
LED indication on sensor and status information via the connector cable
Small hysteresis (< 1mm)

Optional Lockout available, RS Stock No. 825-1732

Approvals

CE, CSA

Warning

  • Incorrect connection may cause permanent damage to Adam devices
Specificaties
Kenmerk Waarde
Supply Voltage 24 V dc
Housing Material Plastic
Range Eden
Series Eva 2TLA
IP Rating IP67, IP69K
Actuator Included Yes
Depth 12mm
Dimensions 60 x 30 x 12 mm
Actuator Type Coded
Length 60mm
Safety Category 4
Housing Colour Black, Yellow
Width 30mm
21 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
23,44
(excl. BTW)
28,36
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 23,44
Related Products
The SensaGuard Non-Contact Switch is PLe, SIL 3 ...
Description:
The SensaGuard Non-Contact Switch is PLe, SIL 3 and Cat 4 rated and is intended for use with sliding, hinge or lift-off machine guard doors. These safety switches are based on RFID (Radio Frequency IDentification) technology for coding and inductive ...
The F3S-TGR non contact safety switches are designed ...
Description:
The F3S-TGR non contact safety switches are designed to interlock hinge, sliding or removable guard doors. Plastic and stainless steel switches are available, the latter are ideally suited to high hygiene demands in the food industry. The switches have a ...
the Str1 transponder safety switch has monitored semiconductor ...
Description:
the Str1 transponder safety switch has monitored semiconductor outputs (oSSds) and can be safely connected either individually or in series. It can be used for applications where a high level of manipulation protection is required. the Str1 is available with ...
The design of the Sipha S4 non-contact switch ...
Description:
The design of the Sipha S4 non-contact switch incorporates several magnetically sensitive elements which must be triggered in a particular sequence to operate correctly. The sensor is designed for use with its own actuator, helping prevent defeat by means of ...