RS Components
Onze website gebruikt cookies en soortgelijke technologieën om u nog beter van dienst te zijn bij het zoeken of het plaatsen van een bestelling, voor analytische doeleinden en om advertenties te personaliseren.
 
Fabrikantnummer

Preventa XCS-DMP Magnetic Safety Switch, Plastic, 24 V dc

Afbeelding representeert productcategorie


6 op voorraad - levertijd is 1 werkdag(en).
Add to Basket

Prijs Each

€ 92,70

(excl. BTW)

€ 112,17

(incl. BTW)

Aantal stuks

Toegevoegd

RS-stocknr.:
766-1661
Fabrikantnummer:
XCSDMP701L01M12
Fabrikant:
Telemecanique Sensors
Land van herkomst:
FR
Aantal stuksPer stuk
1 +€ 92,70

XCS-DMC/XCS-DMP Coded Magnetic Switches, Rectangular


XCS-DM coded magnetic safety switches are designed for monitoring the doors, covers and guards of industrial machines with imprecise guiding and low inertia. These safety switches are ideally suited for machines subjected to frequent washing or liquid spray. They protect the operator by immediately stopping any dangerous movement as soon as the distance between the switch and its magnet is greater than 8mm (5mm for XCS-DMC).
XPS-DM safety modules are specifically designed for monitoring the coded magnetic safety switches. When the XCS-DM safety switch is used in conjunction with the XPS-DM safety relay they offer a certified safety solution for guard monitoring.


Coded magnetic safety switch


Actuation on 3 sides: face to face and face to side
8mm tolerance to misalignment (5mm for XCS-DMC)
LED versions have an LED in series with one N/C giving indication when guard is closed
Coded reed technology - switch cannot be totally defeated by a simple magnet
Rectangular plastic housing
Dimensions: compact: H51 x W16 x D7mm, standard: H88 x W25 x D13mm
Available pre-cabled or with connector on flying lead
IP66/67 protection in accordance with EN/IEC 60529
ROHS compliant


Safety module


Allows multi-switch monitoring to Safety Category 4 solutions in accordance with EN954-1/ISO 13849-1
XPS-DMB can monitor 2 independent sensors and modules, XPS-DME can monitor 6 independent sensors and modules
2 safety outputs and 2 solid state outputs for signalling to the process PLC
LEDs on the front face provide information on the monitoring circuit status
Dimensions: H99 x W22 x D114mm
IP20 protection on terminals and IP40 protection on enclosure, in accordance with EN/IEC 60529


Note

With the appropriate monitoring system and correctly wired these switches can reach safety category 4 conforming to EN/ISO 13849-1, PL e conforming to EN/ISO 13849-1, SIL 3 conforming to EN/IEC 61508.

Standards

IEC 947-1; EN 547-5-1; EN 547-5-3; EN 60204-1; EN 1088 (for Magnetic Switch only)
IEC 204-1; EN 292; EN 60204-1; EN954-1; EN1088 (for Safety Module only)

KenmerkWaarde
Supply Voltage24 V dc
Housing MaterialPlastic
Switch TypeMagnetic Proximity
RangePreventa
SeriesXCS-DMP
Switching Distance8 mm
IP RatingIP67
Sensor PrincipleMagnetic
Safety Category4
Number of Approach Directions3
Actuator TypeCoded
Width25mm
Length88mm
Depth13mm
Dimensions88 x 25 x 13 mm